nanog mailing list archives
Re: PC Routers (was Re: /24s run amuck)
From: "james" <hackerwacker () cybermesa com>
Date: Wed, 14 Jan 2004 16:11:03 -0700
: Which "no features"? I haven't played with zebra yet, but my : understanding is that it supports a large subset of the IOS BGP config : language including application of route-maps to incoming/outgoing routes, : and therefore things like prepending, setting metrics or preference, etc. : Am I mistaken? Yes, all of that is supported & more: zebra(config-router)# neighbor 1.1.1.1 advertisement-interval Minimum interval between sending BGP routing updates interface Interface peer-group Member of the peer-group port Neighbor's BGP port strict-capability-match Strict capability negotiation match timers BGP per neighbor timers transparent-as Do not append my AS number even peer is EBGP peer transparent-nexthop Do not change nexthop even peer is EBGP peer version Neighbor's BGP version activate Enable the Address Family for this Neighbor allowas-in Accept as-path with my AS present in it attribute-unchanged BGP attribute is propagated unchanged to this neighbor capability Advertise capability to the peer default-originate Originate default route to this neighbor description Neighbor specific description distribute-list Filter updates to/from this neighbor dont-capability-negotiate Do not perform capability negotiation ebgp-multihop Allow EBGP neighbors not on directly connected networks enforce-multihop Enforce EBGP neighbors perform multihop filter-list Establish BGP filters local-as Specify a local-as number maximum-prefix Maximum number of prefix accept from this peer next-hop-self Disable the next hop calculation for this neighbor override-capability Override capability negotiation result passive Don't send open messages to this neighbor prefix-list Filter updates to/from this neighbor remote-as Specify a BGP neighbor remove-private-AS Remove private AS number from outbound updates route-map Apply route map to neighbor route-reflector-client Configure a neighbor as Route Reflector client route-server-client Configure a neighbor as Route Server client send-community Send Community attribute to this neighbor shutdown Administratively shut down this neighbor soft-reconfiguration Per neighbor soft reconfiguration unsuppress-map Route-map to selectively unsuppress suppressed routes update-source Source of routing updates weight Set default weight for routes from this neighbor James Edwards Routing and Security jamesh () cybermesa com At the Santa Fe Office: Internet at Cyber Mesa Store hours: 9-6 Monday through Friday 505-988-9200 SIP:1(747)669-1965
Current thread:
- Re: /24s run amuck, (continued)
- Re: /24s run amuck Steven M. Bellovin (Jan 14)
- Re: /24s run amuck Timothy Brown (Jan 14)
- imagestream vs. Cisco Alex Yuriev (Jan 14)
- Re: imagestream vs. Cisco Frank Louwers (Jan 14)
- Re: /24s run amuck jlewis (Jan 14)
- PC Routers (was Re: /24s run amuck) Stephen J. Wilcox (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) james (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) jlewis (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) Joe Abley (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) Alexei Roudnev (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) james (Jan 14)
- Message not available
- Re: PC Routers (was Re: /24s run amuck) james (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) haesu (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) Paul (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) haesu (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) Paul (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) haesu (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) Paul (Jan 14)
- Re: /24s run amuck Steven M. Bellovin (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) Richard A Steenbergen (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) Randy Bush (Jan 14)
- Re: PC Routers (was Re: /24s run amuck) Vadim Antonov (Jan 14)