nanog mailing list archives

RE: DC power versus AC power


From: "Kuhtz, Christian" <christian.kuhtz () BellSouth com>
Date: Sun, 29 Dec 2002 14:37:19 -0500



From: Wayne Bogan [mailto:wbogan () infoave net]
For those AC only powered units, you can also purchase an invertor 
for DC to AC conversion.  You would then have the advantages of DC
for your AC equipment.  This does, however, add the potential of 
another point of failure such as fuses or breakers in the invertor.

Not to mention additional cost of wasted electricity (which does add up
significantly when it is anything but a spot solution) and pitfalls of
inverters (like their imperfect sine waves).  And if you're putting spot
solution UPS units out into the bottom of a particular rack, be ware their
canny ability to catch fire when the price is right.

Inverters or rectifiers should be point solutions in a plant layout.  If you
have a lot of AC & DC, get two protected plants.  Only way to live.
Sometimes that's not just nice to have, but simply required.

If you're primarily a systems shop and have environmentally conditioned
space, get AC.  If you're in a nasty colo spot, with poor environmental
(read: not guaranteed meat locker climate 24x7), get DC & NEBS hardware or
hardware which meets NEBS almost entirely but doesn't carry the sticker for
some silly reason such as "easily flammable plastic used for front grill".
Depending on what your colo requires.  There are many different flavors of
colo. 

Speaking of flavors, consider the impact of a turf vendor based on whatever
decision you chose when going into colo space.  May or may not be an issue.

See what equipment offers what, do the math on cost of plant and gear, pros
& cons.  And make a business decision based on engineering data. (uh, right)

But, as Stephen already eluded to... Compared with an AC plant design, to
me, one of the biggest drawbacks of a DC plant is safety  (I have had to
kick a fellow worker away from the rack before).  One of the biggest
advantages is simplicity of design when it comes to battery plant.  

There is no universal answer, it all depends.  And one ends up shuffling off
and having to do a bunch of homework.

Of course, this is all IMHO and I've been wrong before.

Thanks,
Christian


-----Original Message-----
From: Wayne Bogan [mailto:wbogan () infoave net]
Sent: Sunday, December 29, 2002 1:06 PM
To: nanog () merit edu
Subject: Re: DC power versus AC power




----- Original Message -----
From: "Stephen Sprunk" <ssprunk () cisco com>
To: <ipdude () cattle-today com>; <nanog () merit edu>
Sent: Sunday, December 29, 2002 1:58 AM
Subject: Re: DC power versus AC power



Thus spake ip dude <ipdude () cattle-today com>:
Hello NANOG group. I am trying to make a case for using DC power
supplies versus AC power supplies for typical IP networking
equipment. Is there any published whitepapers detailing this subject?
Do you have any suggestions to aide my argument?

Most of the argument depends on the facility you're in.  Assuming you're
asking as an end-customer:

DC requires clue from your staff when installing/removing equipment, and
this means safety training at a minimum.  Power choice also affects your
equipment purchasing: DC versions of gear are often priced higher, and
gear
not intended for telcos/ISPs may not have a DC option available at all.

OTOH, many colos -- especially ones run by telcos -- don't provide AC UPS.
If you want AC UPS in these environments, you'll have to provide your own,
which is expensive, bulky, and a maintainance burden.

If you're building your own datacenter, please specify that and I'm sure
you'll get a whole different discussion :)

S





*****
"The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential, proprietary, and/or
privileged material.  Any review, retransmission, dissemination or other use
of, or taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited.  If you received
this in error, please contact the sender and delete the material from all
computers."


Current thread: