![nanog logo](/images/nanog-logo.png)
nanog mailing list archives
Re: Clear Channel on a T1
From: "Ron Buchalski" <rbuchals () hotmail com>
Date: Thu, 22 Mar 2001 22:19:35
From: "Douglas A. Dever" <dever () hq oh verio net> Reply-To: dever () verio net To: CARL.P.HIRSCH () sargentlundy com CC: nanog () merit edu Subject: Re: Clear Channel on a T1 Date: Thu, 22 Mar 2001 14:56:46 -0500 (EST)I'm quite suprised they'd offer you a data circuit that wasn't b8zs. I think they're just using this as a way to get an extra couple of bucks per month per circuit. Without falling into a long discorse about timing on a DS1, the bottom line is that you get ~1.54Mbit/sec because the data stream is manipulated to maintain timing. A non-clear channel data circuit would only use 7 bits for data, with the 8th bit always being a 1 to maintain timing.
Forcing the 8th bit to a '1' isn't done to maintain timing.The 8th bit was forced to a '1' to maintain ones density on the T1 line. Early T1 specs did not allow more than 15 consecutive zeros to be transmitted because the T1 repeaters along the line rely on periodic pulses to keep their oscillators active. It was not a problem for voice circuits, since voice DS0s would contain a '1' for the signaling bit, but there is a potential for data DS0s to contain a long string of zeros, and several contiguous data DS0s could result in a long sequence of zeros (more than 15).
In fact, older CSUs would inject a '1' if more than 15 consecutive zeros were sent, thus corrupting the bit stream. For a voice DS0, it was probably not detected. For a data DS0, it would result in a corrupted data frame.
Of course, in the "modern" world, with B8ZS line coding insuring that there will always be line transitions (to keep the T1 repeaters happy), a constant stream of zeros can be sent on the data channels, and the line coding will inject ones (and remove them at the other end) so forcing the 8th bit to a one is no longer needed.
-rb _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com
Current thread:
- Clear Channel on a T1 CARL . P . HIRSCH (Mar 22)
- Re: Clear Channel on a T1 Terrence Chatfield (Mar 22)
- Re: Clear Channel on a T1 Jason A. Mills (Mar 22)
- <Possible follow-ups>
- Re: Clear Channel on a T1 CARL . P . HIRSCH (Mar 22)
- Re: Clear Channel on a T1 Brett Frankenberger (Mar 22)
- Re: Clear Channel on a T1 Terrence Chatfield (Mar 22)
- RE: Clear Channel on a T1 Christian Kuhtz (Mar 22)
- Re: Clear Channel on a T1 Douglas A. Dever (Mar 22)
- Re: Clear Channel on a T1 Rachel Warren (Mar 23)
- Re: Clear Channel on a T1 Ron Buchalski (Mar 22)
- Re: Clear Channel on a T1 Majdi S. Abbas (Mar 22)
- Re: Clear Channel on a T1 Ron Buchalski (Mar 23)
- Re: Clear Channel on a T1 Ron Buchalski (Mar 23)
- Re: Clear Channel on a T1 Christopher A. Woodfield (Mar 23)
- Re: Clear Channel on a T1 lucifer (Mar 23)
- Re: Clear Channel on a T1 Peter Galbavy (Mar 26)
- Re: Clear Channel on a T1 Christopher A. Woodfield (Mar 23)