Re: How to save the content of an RTP stream in WS 2.4.4?

[Jaap Keuter <jaap.keuter () xs4all nl>]

Hi,

What if you choose Unsynchronised Forward Stream Audio and select the raw output format in the file save dialog?


> On 26 Jan 2018, at 16:59, Joe Tozer <epjtozer () gmail com> wrote:
>
> thanks for the reply, the save button is there but the only options I get in the save drop down are:
>
> Unsynchronised Forward Stream Audio
> File synchronised Forward Stream Audio
> Forward Stream CSV
> Save Graph
>
> none of these saves the raw RTP MP2T stream content
>
> On 26 January 2018 at 15:29, Jaap Keuter <jaap.keuter () xs4all nl <mailto:jaap.keuter () xs4all nl>> wrote:
> Hi,
>
> You’ll find the save option at the lower right hand side of the RTP stream analysis window.
> Click on it and choose how to save the stream, then in the file dialog choose the format and name.
>
> Good luck,
> Jaap
>
> > On 26 Jan 2018, at 15:14, joe tozer <wireshark.20090520 () tozer org uk <mailto:wireshark.20090520 () tozer org 
> > uk>> wrote:
> >
> >
> > I've just moved from WS 1.10 to WS 2.4.4; in WS 1.10 I used to be able to save the (MP2T) content of an RTP stream 
> > by highlighting a packet from the desired stream in the main WS window
> > then selecting the “Telephony” menu
> > hovering on "RTP"
> > selecting "stream analysis"
> > selecting "forward" on the “Channels” radio button
> > Clicking "save payload" (with a .ts extension for an MP2T transport stream)
> >
> > Anyone advise how to do this in WS2.4.4, where I can't find a "save payload" option.
> >
> >
> > MTIA

___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
Archives:    https://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request () wireshark org?subject=unsubscribe