Re: Build error with VS2013 Ultimate

["e-mail graham.shanks via Wireshark-dev" <wireshark-dev () wireshark org>]

> On 06 July 2017 at 21:44 Graham Bloice <graham.bloice () trihedral com> wrote:
>
>
>
>     On 6 July 2017 at 19:37, e-mail graham.shanks via Wireshark-dev
> <wireshark-dev () wireshark org mailto:wireshark-dev () wireshark org > wrote:
>
>         > > 
> >         I have a problem with building Wireshark on a 64-bit Windows 8
> > machine using VS2013 Ultimate. I last built Wireshark on on this machine
> > about 6 months ago, so I started a completely new development by installing
> > and preparing the sources as per the development guide. When building the
> > sources I get 8 errors, all basically as follows:
> >
> >         "C:\Development\wsbuild64\Wireshark.sln" (default target) (1) ->
> >         "C:\Development\wsbuild64\wireshark.vcxproj.metaproj" (default
> > target) (69) ->
> >         "C:\Development\wsbuild64\wireshark.vcxproj" (default target) (138)
> > ->
> >         C:\Development\wsbuild64\image\wireshark.rc(1): fatal error RC1015:
> > cannot open include file 'winver.h'.
> > [C:\Development\wsbuild64\wireshark.vcxproj]
> >
> >         Inspecting the solution file the $(WindowsSDK_IncludePath) macro is
> > pointing to the correct system directory (i.e., it contains winver.h) and is
> > included in the VC++ Directories property.
> >
> >         Any pointers to what is wrong?
> >
> >          
> >
> >         Regards
> >
> >         Graham
> >
> >
> >     > 
>     Some questions:
>        1. Are you building from the command line with msbuild or using the
> Visual Studio IDE?
>        2. Can you attach the output of the CMake configuration step, this can
> be done by redirecting the output of the command to a text file and attaching
> that file i.e. "cmake ... ">&1 >cmake.txt"
>        3. Similarly, can you attach the output of the msbuild step, i.e.
> "msbuild ... 2>&1 >build.txt"
>
>     --
>     Graham Bloice


 The problem was that I was using cmake v3.9.0 rc5 (cmake v3.9.0 also fails).
Once I reverted to cmake v3.8.2 everything was OK.

Regards
Graham

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev () wireshark org>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request () wireshark org?subject=unsubscribe