Re: How to apply capture filters in newer version of Wireshark?

[Jim Aragon <Jim () agdatasystems com>]

At 07:00 PM 7/6/2012, you wrote:

>I looked in the help, and it still shows capture filters on the same
>page as the Options page...but when I bring up options, it's not there.
>
>So How do I setup a capture filter?...
>(This is on the Windows version that shows multiple interfaces...)

It would be more helpful to give us an actual version number.

It sounds like you may have upgraded to Wireshark 1.8.0. This version 
now has the capability to capture on multiple interfaces 
simultaneously, and each interface can have a different capture 
filter. For this reason, the capture filter input field had to be 
moved from the Capture Options dialog to the individual interface properties.

So, from the Capture Options dialog, double-click on the interface 
for which you want to set a capture filter. This will open the "Edit 
Interface Settings" dialog and you will see the capture filter input 
field at the bottom.

___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request () wireshark org?subject=unsubscribe