Re: SCCP Address Indicator h-Bit

[Jeff Morriss <jeff.morriss.ws () gmail com>]

Arjan Van Der Oest wrote:
> Hi,
>
> I'm using 1.8.0 and it seems the SCCP dissector is never decoding the SCCP Address Indicator h-Bit. Under normal circumstances this should 
> (afaik) be set to '0' but by accident I stumbled into a situation where the h-bit was actually set to '1', breaking things. 
> From the packet-byte window is could be seen, but it would be terrible convenient if the h-bit would also be decoded too. Can this be added or 
> is there a reason not to do this?

(I assume you mean the "reserved for national use" bit in the AI.)

Hmmm, yeah, I guess that was just an oversight (and here I am usually 
preaching about displaying reserved/spare fields)...

I added decode of that bit (for non-ANSI configurations; the bit is 
used--and decoded--in ANSI) in r43590.  (This change will appear in the 
automated builds in a few hours and the next development version--i.e., 
1.9.0 and later).
___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev () wireshark org>
Archives:    http://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
            mailto:wireshark-dev-request () wireshark org?subject=unsubscribe