Re: slow sip voip flow for large captures

[Jaap Keuter <jaap.keuter () xs4all nl>]

Hi,

Sharing this table between a dissector and a tap would probably be Bad 
Style, IMHO.
Sending this relevant information from the dissector to the tap may be 
possible.
Question is how the generalize this for all types of calls.

Thanks,
Jaap


On 2012-02-03 13:44, Anders Broman wrote:
> Hi,
> Please put the patches in bugzilla, if possible split them in two
> parts one that's ok for all types(Step 2,3,4?) of calls and one which
> Implements the stuff for SIP but not for the other call types. I
> think the SIP dissector keeps a table over the calls as well could
> that table be shared?
> Regards
> Anders
>
> -----Original Message-----
> From: wireshark-dev-bounces () wireshark org
> [mailto:wireshark-dev-bounces () wireshark org] On Behalf Of Cristian
> Constantin
> Sent: den 3 februari 2012 13:01
> To: Developer support list for Wireshark
> Subject: [Wireshark-dev] slow sip voip flow for large captures
>
> hi!
>
> wireshark can draw call flows for sip voip calls (accessible through
> the menu Telephony/VoIP Calls).
>
> however, when the capture is large, containing tens of thousands of
> sip voip calls, wireshark becomes very slow at producing the list of
> calls and the call flows.

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev () wireshark org>
Archives:    http://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
            mailto:wireshark-dev-request () wireshark org?subject=unsubscribe