Re: Question Regarding Connecting HUB and Wireshark

[dan meyer <dan () meyer-family net>]

You hub, while labeled and marketed as a hub, is likely actually a switch.

-- Dan Meyer
On Thu, Mar 25, 2010 at 1:15 PM, Spector, Paul <paul.spector () lmco com>wrote:

>  I have a Linksys 8 port HUB (Model EWHUB) with a BNC connection. I am
> attempting to connect the WireShark laptop to the hub to capture data from
> the BNC connection to the Ethernet connection. My problem is I never see
> data to the device that is connected to the HUB.
>
>
>
> I welcome any advice you can provide.
>
>
>
> Thank you!!
>
>
>
> *Respectfully,** *
> *Paul Spector**
> **Systems Engineering**
> **Lockheed Martin Mission Systems & Sensors*
> P.O. Box 4840, EP5-300, MD69
> Syracuse, NY 13221-4840
> Voice: 315-456-3916
> Fax: 315-456-1601
> Email: Paul.Spector () lmco com <paul.spector () lmco com>
>
>
>
> ___________________________________________________________________________
> Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
> Archives:    http://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
>             mailto:wireshark-users-request () wireshark org
> ?subject=unsubscribe
___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request () wireshark org?subject=unsubscribe