Wireshark mailing list archives

Re: Duplicate Packets when importing .pcap from Cisco NAM module.


From: Sake Blok <sake () euronet nl>
Date: Tue, 10 Aug 2010 17:14:26 +0200

Not sure how to do it in NAM, but the principe is to only capture "incoming" (RX) packets  instead of "both" incoming 
and outgoing. You need to do this, since every packet enters *and* leaves the VLAN, thus is captured twice if you 
capture both. This should be configured at the source side of the SPAN definition...

Cheers,


Sake



On 10 aug 2010, at 16:19, Fraasch, James M. wrote:

How do you do that?
 
James Fraasch 
Network Engineer 


From: wireshark-users-bounces () wireshark org [mailto:wireshark-users-bounces () wireshark org] On Behalf Of Kevin 
Cullimore
Sent: Monday, August 09, 2010 5:45 PM
To: wireshark-users () wireshark org
Subject: Re: [Wireshark-users] Duplicate Packets when importing .pcap from Cisco NAM module.

On 8/9/2010 1:01 PM, Akhtar Rasool wrote:
Hello everyone,
 
I am seeing duplicate packets when importing packet captures from Cisco NAM module into Wireshark. Would appreciate 
any ideas to avoid that. Thanks.
If you're relying upon SPAN to monitor VLANs, you may want to ensure that you're doing so unidirectionally.
 
Regards,
 
Akhtar

___________________________________________________________________________
Sent via:    Wireshark-users mailing list 
<wireshark-users () wireshark org>

Archives:    
http://www.wireshark.org/lists/wireshark-users

Unsubscribe: 
https://wireshark.org/mailman/options/wireshark-users

             
mailto:wireshark-users-request () wireshark org?subject=unsubscribe

___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
            mailto:wireshark-users-request () wireshark org?subject=unsubscribe

___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request () wireshark org?subject=unsubscribe


Current thread: