Re: newbie question

[Phil Paradis <Phil.Paradis () unitedtote com>]

Try rebooting (or restarting the NPF driver) after installing the loopback; I've found that newly added interfaces 
don't always show up if you don't do this.

--
Phillip R. Paradis | Network Engineer | United Tote | 2724 River Green Circle | Louisville | KY | Phone: +1 (502) 
509-7445

From: wireshark-users-bounces () wireshark org [mailto:wireshark-users-bounces () wireshark org] On Behalf Of Aaron 
Stromas
Sent: Wednesday, April 28, 2010 12:22 PM
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] newbie question

The trouble is that although I installed and configured the loopback interface (it shows as "connected"), WhiteShark 
does not list it. :-(

-a
On 28 April 2010 11:49, M K <gedropi () gmail com<mailto:gedropi () gmail com>> wrote:
Within Preferences>Protocols>HTTP do you have the correct ports
listed?  Are you able to filter on tcp.port==8080 alone first before
making it into a compound filter?  If I am remembering correctly,
after installing the virtual 127.0.0.1 from MS, I think  that you need
the correct interface to do the capture.

On 4/28/10, Aaron Stromas <passogiau () gmail com<mailto:passogiau () gmail com>> wrote:
> Greetings,
>
> I am trying to capture HTTP traffic on my local box. The HTTP server is
> listening on port 8080, and the client (browser) also running on the local
> box submits requests to http://localhost:8080/.<http://localhost:8080/>..
>
> I've tried this filter
>
> http and (ip.dst_host==localhost || ip.dst==127.0.0.1)
>
> and this one
>
> tcp.port==8080 and (ip.dst_host==localhost || ip.dst==127.0.0.1)
>
> but nothing get captured!
>
> I expect, I'm missing something basic but what?
> TIA
>
>
>
> --
> Aaron Stromas
___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org<mailto:wireshark-users () wireshark org>>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
            mailto:wireshark-users-request () wireshark org<mailto:wireshark-users-request () wireshark 
org>?subject=unsubscribe



--
Aaron Stromas

___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request () wireshark org?subject=unsubscribe