Re: Base setup

[Eric Albert <ealbert () wilsons ca>]

I've done all of that.  Is there supposed to be any changes made to the
php.ini file?  I'm not reading any of that, but the last time I used apache
there were some changes needed in there



*Eric Albert **Network & Infrastructure Specialist*

*902-237-7889 | help () wilsons ca  <help () wilsons ca>*

On Tue, Aug 28, 2018 at 1:49 PM, Carl Huth <carlhuth () gmail com> wrote:

> In Ubuntu, you can check the mods that are enabled by using :
> ls /etc/apache2/mods-enabled
> or /etc/apache2/mods-available if you want to see which ones are available.
>
> Your PHP settings are in /etc/php/5.6/apache2/php.ini
>
> service apache2 reload should be enough for the module to load but you may
> need to do a full restart,s*ervice apache2 restart*
>
>
> It should just work for you at this point.  The instructions I had read
> from the snort site, do say to install apache using apt-get and a ppa for
> the PHP 5.6, but in case you are missing any dependencies:
>
> https://snort-org-site.s3.amazonaws.com/production/
> document_files/files/000/000/122/original/Snort_2.9.9.x_on_
> Ubuntu_14-16.pdf?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=
> AKIAIXACIED2SPMSC7GA%2F20180828%2Fus-east-1%2Fs3%
> 2Faws4_request&X-Amz-Date=20180828T163354Z&X-Amz-Expires=172800&X-Amz-
> SignedHeaders=host&X-Amz-Signature=a00e58932244b7289e87399a70de3a
> 12aca5df094c547ed0072b5aae64dda400
>
>
> You should make sure that your adodb libraries are built and installed
> properly btw. :)
>
> Now edit the config file: sudo vi /var/www/html/base/base_conf.php with
> the following settings (*note that the trailing slash on line 80 is
> required, despite the instructions in the configuration file*):
> $BASE_urlpath = '/base'; # line 50
> $DBlib_path = '/var/adodb/'; #line 80
> $alert_dbname = 'snort'; # line 102
> $alert_host = 'localhost';
> $alert_port = '';
> $alert_user = 'snort';
> $alert_password = 'MySqlSNORTpassword'; # line 106
>
>
> On Tue, Aug 28, 2018 at 12:41 PM Ryan via Snort-users <
> snort-users () lists snort org> wrote:
>
> > Here are my build notes for PHP5....this is what you probably
> > missed...because I missed it too. :)
> >
> > a2enmod php5.6
> >
> >
> > # Notes
> > # Download ADODB
> > https://downloads.sourceforge.net/project/adodb/adodb-php5-
> > only/adodb-520-for-php5/adodb-5.20.13.zip
> >
> > # Install ADODB per directions (google)
> > adodb-5.20.13.zip
> >
> > # Install PHP5
> > apt-get install ca-certificates apt-transport-https
> > wget -q https://packages.sury.org/php/apt.gpg -O- | sudo apt-key add -
> > echo "deb https://packages.sury.org/php/ stretch main" | sudo tee
> > /etc/apt/sources.list.d/php.list
> >
> > apt-get update
> > apt-get install php5.6
> > apt-get install php5.6-cli php5.6-common php5.6-curl php5.6-mbstring
> > php5.6-mysql php5.6-xml
> > apt-get install libapache2-mod-php5.6 php5.6-mysql php5.6-common
> > php5.6-gd php5.6-cli php-pear
> >
> > pear install -f Image_Graph
> >
> > service apache2 reload
> >
> > a2dismod php7.0
> >
> > a2enmod php5.6
> >
> > systemctl restart apache2
> >
> >
> > -Ryan
> >
> >
> >
> >
> >
> > On Tue, Aug 28, 2018 at 8:58 AM Eric Albert <ealbert () wilsons ca> wrote:
> >
> > > Took a bit more than I thought, but a php -v shows that it's running
> > > php5.6.32.  Still can't get on the base site though, not sure what else it
> > > could be.  I can get on the apache site no problem, just the base link
> > > doesn't want to work.
> > >
> > >
> > >
> > > *Eric Albert **Network & Infrastructure Specialist*
> > >
> > > *902-237-7889 | help () wilsons ca  <help () wilsons ca>*
> > >
> > > On Tue, Aug 28, 2018 at 11:43 AM, Ryan <ryan95842 () gmail com> wrote:
> > >
> > > > Hi Eric,
> > > >
> > > > I just completed this build on Debian 9 a couple of weeks ago and had
> > > > to install PHP 5.6 for BASE to work. It was an easy install. Set the
> > > > preferred PHP to use version 5 (or unistall 7) and BASE worked perfectly.
> > > >
> > > > -Ryan
> > > >
> > > >
> > > >
> > > > On Tue, Aug 28, 2018 at 4:27 AM Eric Albert <ealbert () wilsons ca> wrote:
> > > >
> > > > > So I installed PHP, but I think the problem is that base is supposed
> > > > > to use PHP5, and PHP7 is installed because 16.04 uses it by default.  It
> > > > > did say in the docs to install the proper PPA to get around it, but I don't
> > > > > think it works.  I can get to the apache page, but as soon as I try to go
> > > > > to base_main.php the page cannot be found.  I made the changes that the doc
> > > > > said to make in the base_conf.php, is there some other change to some
> > > > > config file that needs to be done so that apache knows where to go when
> > > > > that page is requested?
> > > > >
> > > > >
> > > > >
> > > > > *Eric Albert **Network & Infrastructure Specialist*
> > > > >
> > > > > *902-237-7889 | help () wilsons ca  <help () wilsons ca>*
> > > > >
> > > > > On Mon, Aug 27, 2018 at 3:57 PM, Eric Albert <ealbert () wilsons ca>
> > > > > wrote:
> > > > >
> > > > > > Right, the docs didn't say to install apache and I had to do that,
> > > > > > but I didn't think about PHP support, I'll give it a go
> > > > > >
> > > > > > Thx
> > > > > >
> > > > > >
> > > > > >
> > > > > > *Eric Albert **Network & Infrastructure Specialist*
> > > > > >
> > > > > > *902-237-7889 | help () wilsons ca  <help () wilsons ca>*
> > > > > >
> > > > > > On Mon, Aug 27, 2018 at 3:53 PM, Jason Gates <
> > > > > > jason.gates () longmontcolorado gov> wrote:
> > > > > >
> > > > > > > Probably missing PHP support on your webserver. Don’t forget to
> > > > > > > restart your webserver if you did install PHP.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > >
> > > > > > > Jason Gates
> > > > > > >
> > > > > > > Security Analyst
> > > > > > >
> > > > > > > Enterprise Technology Services
> > > > > > >
> > > > > > > City of Longmont
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > *From:* Snort-users <snort-users-bounces () lists snort org> *On
> > > > > > > Behalf Of *Eric Albert
> > > > > > > *Sent:* Monday, August 27, 2018 12:40 PM
> > > > > > > *To:* snort-users () lists snort org
> > > > > > > *Subject:* [Snort-users] Base setup
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > I'm playing around with snort for the first time and I followed the
> > > > > > > doc to install on ubuntu with no problem except this last part.  I'm
> > > > > > > getting the attached when I try to finish the web install, and I'm not sure
> > > > > > > where I went wrong.  Has anyone had this particular issue?
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > *Eric Albert  **Network & Infrastructure Specialist*
> > > > > > >
> > > > > > > *902-237-7889 | help () wilsons ca  <help () wilsons ca>*
> > > > > _______________________________________________
> > > > > Snort-users mailing list
> > > > > Snort-users () lists snort org
> > > > > Go to this URL to change user options or unsubscribe:
> > > > > https://lists.snort.org/mailman/listinfo/snort-users
> > > > >
> > > > >         To unsubscribe, send an email to:
> > > > >         snort-users-leave () lists snort org
> > > > >
> > > > > Please visit http://blog.snort.org to stay current on all the latest
> > > > > Snort news!
> > > > >
> > > > > Please follow these rules: https://snort.org/faq/what-is-
> > > > > the-mailing-list-etiquette
> > > _______________________________________________
> > Snort-users mailing list
> > Snort-users () lists snort org
> > Go to this URL to change user options or unsubscribe:
> > https://lists.snort.org/mailman/listinfo/snort-users
> >
> >         To unsubscribe, send an email to:
> >         snort-users-leave () lists snort org
> >
> > Please visit http://blog.snort.org to stay current on all the latest
> > Snort news!
> >
> > Please follow these rules: https://snort.org/faq/what-is-
> > the-mailing-list-etiquette
_______________________________________________
Snort-users mailing list
Snort-users () lists snort org
Go to this URL to change user options or unsubscribe:
https://lists.snort.org/mailman/listinfo/snort-users

        To unsubscribe, send an email to:
        snort-users-leave () lists snort org

Please visit http://blog.snort.org to stay current on all the latest Snort news!

Please follow these rules: https://snort.org/faq/what-is-the-mailing-list-etiquette