Snort mailing list archives

Previous By Date Next
Previous By Thread Next

Re: 32bit snort rpm

From: James Lay <jlay () slave-tothe-box net>
Date: Fri, 02 Oct 2015 11:12:11 -0600
Yea there you go...odd that there's no AFPacket.  If you're running as 
root, which I think from other emails I see you might be, I would create 
a script log like so:

script snorttest.txt
strace snort <your options>
ctrl-D

Then let's see what that looks like.

James

On 2015-10-02 11:08 AM, Lamont, Brian A. wrote:

Run strace with no options or do you have a few flags that are 
beneficial?


./configure --prefix=/opt/snort-build
--with-libpcap-includes=/opt/snort-build/include
--with-libpcap-libraries=/opt/snort-build/lib
--with-dnet-includes=/opt/snort-build/include
--with-dnet-libraries=/opt/snort-build/lib
.
.

Build AFPacket DAQ module.. : no
Build Dump DAQ module...... : yes
Build IPFW DAQ module...... : yes
Build IPQ DAQ module....... : no
Build NFQ DAQ module....... : no
Build PCAP DAQ module...... : yes
Build netmap DAQ module.... : no



-----Original Message-----
From: James Lay [mailto:jlay () slave-tothe-box net]
Sent: Friday, October 02, 2015 9:55 AM
To: Lamont, Brian A.
Cc: snort-users () lists sourceforge net
Subject: RE: [Snort-users] 32bit snort rpm

Yea that's for config.log....I'm talking about the actual end of
running your ./configure in a terminal.  At this point...boy I don't
know...my next step would be do run snort with strace and see where
it's flaking out.

On 2015-10-02 10:50 AM, Lamont, Brian A. wrote:

Looks a little different than yours.

BUILD_AFPACKET_MODULE_FALSE=''
BUILD_AFPACKET_MODULE_TRUE='#'
BUILD_DUMP_MODULE_FALSE='#'
BUILD_DUMP_MODULE_TRUE=''
BUILD_IPFW_MODULE_FALSE='#'
BUILD_IPFW_MODULE_TRUE=''
BUILD_IPQ_MODULE_FALSE=''
BUILD_IPQ_MODULE_TRUE='#'
BUILD_MODULES_FALSE='#'
BUILD_MODULES_TRUE=''
BUILD_NETMAP_MODULE_FALSE=''
BUILD_NETMAP_MODULE_TRUE='#'
BUILD_NFQ_MODULE_FALSE=''
BUILD_NFQ_MODULE_TRUE='#'
BUILD_PCAP_MODULE_FALSE='#'
BUILD_PCAP_MODULE_TRUE=''
BUILD_SHARED_MODULES_FALSE='#'
BUILD_SHARED_MODULES_TRUE=''


-----Original Message-----
From: James Lay [mailto:jlay () slave-tothe-box net]
Sent: Friday, October 02, 2015 9:10 AM
To: snort-users () lists sourceforge net
Subject: Re: [Snort-users] 32bit snort rpm

What's the end of your DAQ ./configure look like?  I.E.:

Build AFPacket DAQ module.. : yes
Build Dump DAQ module...... : yes
Build IPFW DAQ module...... : yes
Build IPQ DAQ module....... : no
Build NFQ DAQ module....... : no
Build PCAP DAQ module...... : yes
Build netmap DAQ module.... : no

James

On 2015-10-02 09:56 AM, Lamont, Brian A. wrote:

-T without --daq pcap showed no errors.  Changing to -D still
complained about missing --daq pcap


-----Original Message-----
From: James Lay [mailto:jlay () slave-tothe-box net]
Sent: Friday, October 02, 2015 8:46 AM
To: snort-users () lists sourceforge net
Subject: Re: [Snort-users] 32bit snort rpm

Drop the --daq pcap as that's the default anyway.  In a console try:

/usr/local/bin/snort -T -u snort -g snort -c /etc/snort/snort.conf

Should run a test and give you any errors, if none then change your
-T to -D.

James

On 2015-10-02 09:28 AM, Lamont, Brian A. wrote:

I have. I export the library path first, then run the full snort
command below. You suppose there’s a flub with the library path,
something not listed?

/usr/local/bin/snort -D -u snort -g snort -c /etc/snort/snort.conf
--daq pcap;

FROM: Al Lewis (allewi) [mailto:allewi () cisco com]
 SENT: Thursday, October 01, 2015 4:29 PM
 TO: Lamont, Brian A.
 CC: snort-users () lists sourceforge net
 SUBJECT: RE: [Snort-users] 32bit snort rpm

I would test that you can run it manually first. Then create a
script.


Albert Lewis

QA Software Engineer

SOURCEFIRE, Inc. now part of CISCO

9780 Patuxent Woods Drive
 Columbia, MD 21046

Phone: (office) 443.430.7112

Email: allewi () cisco com

FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]
 SENT: Thursday, October 01, 2015 6:49 PM
 TO: Al Lewis (allewi)
 CC: snort-users () lists sourceforge net
 SUBJECT: RE: [Snort-users] 32bit snort rpm

We have a startup script.

-------------------------------

#!/bin/sh

case $1 in

'start')


LD_LIBRARY_PATH=/opt/snort-build/lib:/usr/local/lib:/usr/local/lib/s
n
o
rt_dynamicpreprocessor:/usr/local/lib/snort_dynamicengine:/usr/local
/
l
ib;


 export LD_LIBRARY_PATH;

 /usr/local/bin/snort -D -u snort -g snort -c /etc/snort/snort.conf
--daq pcap;

;;

'stop')

 kill -1 `ps -ef | grep snort | grep -v grep | awk '{print $2}'`

;;

*)

 echo "Usage: $0 start|stop" >&2

exit 1

;;

esac

exit 0

FROM: Al Lewis (allewi) [mailto:allewi () cisco com]
 SENT: Thursday, October 01, 2015 3:44 PM
 TO: Lamont, Brian A.
 CC: snort-users () lists sourceforge net
 SUBJECT: RE: [Snort-users] 32bit snort rpm

How are you starting snort to get that error?

Albert Lewis

QA Software Engineer

SOURCEFIRE, Inc. now part of CISCO

9780 Patuxent Woods Drive
 Columbia, MD 21046

Phone: (office) 443.430.7112

Email: allewi () cisco com

FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]
 SENT: Thursday, October 01, 2015 6:14 PM
 TO: Stephen Gantz
 CC: Al Lewis (allewi); snort-users () lists sourceforge net
 SUBJECT: RE: [Snort-users] 32bit snort rpm

Ok I cleared up the RULE_PATH variable since it had not referenced
the correct directory. Now I can’t find daq or pcap at snort 
startup.

15 x88022 snort[16459]:
+----------------------------------------------------------------

Oct 1 14:48:15 x88022 snort[16459]: [ Number of patterns truncated
to
20 bytes: 24 ]

Oct 1 14:48:15 x88022 snort[16459]: FATAL ERROR: Can't find pcap 
DAQ!

IN /USR/BIN I HAVE:

daq-modules-config -> /opt/snort-build/bin/daq-modules-config

IN /USR/SBIN:

pcap-config -> /opt/snort-build/bin/pcap-config

FOR LIBDNET:

[root@x88022 sbin]# ls -al /usr/local/lib/libdnet.1

lrwxrwxrwx 1 root root 13 Sep 14 13:58 /usr/local/lib/libdnet.1 ->
libdnet.1.0.1

[root@x88022 sbin]# ls -al /opt/snort-build/lib/libdnet*

lrwxrwxrwx 1 root root 24 Oct 1 15:01 libdnet.1 ->
/usr/local/lib/libdnet.1

[ROOT@X88022 LIB]# LDD /USR/LOCAL/BIN/SNORT

 linux-gate.so.1 => (0x00655000)

 libdnet.1 => /usr/local/lib/libdnet.1 (0x00e79000)

 libpcre.so.0 => /lib/libpcre.so.0 (0x0066e000)

 libnsl.so.1 => /lib/libnsl.so.1 (0x00c2a000)

 libuuid.so.1 => /lib/libuuid.so.1 (0x004e3000)

 libm.so.6 => /lib/libm.so.6 (0x00159000)

 libcrypto.so.6 => /lib/libcrypto.so.6 (0x078b5000)

 libdl.so.2 => /lib/libdl.so.2 (0x00699000)

 libpcap.so.1 => /usr/local/lib/libpcap.so.1 (0x007a4000)

 libsfbpf.so.0 => /usr/local/lib/libsfbpf.so.0 (0x00a93000)

 libz.so.1 => /lib/libz.so.1 (0x006a0000)

 libpthread.so.0 => /lib/libpthread.so.0 (0x006b5000)

 libc.so.6 => /lib/libc.so.6 (0x00182000)

 /lib/ld-linux.so.2 (0x004f1000)

[root@x88022 lib]# snort -V

 ,,_ -*> Snort! <*-

 o" )~ Version 2.9.7.5 GRE (Build 262)

 '''' By Martin Roesch & The Snort Team:
http://www.snort.org/contact#team [4]

 Copyright (C) 2014-2015 Cisco and/or its affiliates. All rights
reserved.

 Copyright (C) 1998-2013 Sourcefire, Inc., et al.

 Using libpcap version 1.7.4

 Using PCRE version: 6.6 06-Feb-2006

 Using ZLIB version: 1.2.3

FROM: Stephen Gantz [mailto:stephen.gantz () faculty umuc edu]
 SENT: Thursday, October 01, 2015 12:16 PM
 TO: Lamont, Brian A.
 CC: Al Lewis (allewi); snort-users () lists sourceforge net
 SUBJECT: Re: [Snort-users] 32bit snort rpm

Try setting RULE_PATH to an absolute path instead of the relative
one in snort.conf by default.

 Dr. Stephen D. Gantz

CISSP-ISSAP, CEH, CGEIT, CRISC, CIPP/G, C|CISO

Professor of Information Assurance

The Graduate School

University of Maryland University College

stephen.gantz () faculty umuc edu

 On Oct 1, 2015, at 2:55 PM, Lamont, Brian A.
<Brian.Lamont () gd-ms com>
wrote:


This path exists on my 64 bit systems, /etc/snort/rules/local.rules
but the one in the error below does not . And the rules directory
on the 64 bit systems is full of rules, but I'm unable to find the
default set in the build area, and community rules file is all find
on the website.

Oct 1 11:29:54 x88022 snort[10659]: FATAL ERROR:
/etc/snort/../rules/local.rules(0) Unable to open rules file
"/etc/snort/../rules/local.rules": No such file or directory.

-----Original Message-----
From: Al Lewis (allewi) [mailto:allewi () cisco com]
Sent: Wednesday, September 30, 2015 4:43 PM
To: Lamont, Brian A.
Cc: snort-users () lists sourceforge net
Subject: RE: [Snort-users] 32bit snort rpm

Is this a copy paste error?

"/usr/local/lib/libpcap.so.1 -> /opt/snort-build/lib"

If not... I think your link is wrong.

This---> /usr/local/lib/libpcap.so.1

Should link to your libpcap file and not the directory.

Albert Lewis
QA Software Engineer
SOURCEfire, Inc. now part of Cisco
9780 Patuxent Woods Drive
Columbia, MD 21046
Phone: (office) 443.430.7112
Email: allewi () cisco com

-----Original Message-----
From: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]
Sent: Wednesday, September 30, 2015 7:29 PM
To: Al Lewis (allewi)
Cc: snort-users () lists sourceforge net
Subject: RE: [Snort-users] 32bit snort rpm

Appears to be a library linkage that’s not right, and maybe it's
obvious but I don't chase these issues much. So while I continue to
look I'll send you what I have.

Since we installed libpcap.so.1.7.4, I'm guessing we need to make
sure libpcap.so.1 can find it. In the startup script I have
LD_LIBRARY_PATH exported as follows:

LD_LIBRARY_PATH=/opt/snort-build/lib:/usr/local/lib; export
LD_LIBRARY_PATH;

The error
---
[root@x88022 rc3.d]# ./S99snortd start
/usr/local/bin/snort: error while loading shared libraries:
/usr/local/lib/libpcap.so.1: cannot read file data: Error 21

Links to libpcap.so.1
---
[root@x88022 ~]# ls -al /usr/local/lib/libpcap* lrwxrwxrwx 1 root
root 20 Sep 29 14:42 /usr/local/lib/libpcap.so.1 ->
/opt/snort-build/lib

/opt/snort-build is where is built snort and all packages.
---
[root@x88022 ~]# ls -al /opt/snort-build/lib/libpcap*
-rw-r--r-- 1 root root 695832 Sep 29 14:06
/opt/snort-build/lib/libpcap.a lrwxrwxrwx 1 root root 12 Sep 29
14:06 /opt/snort-build/lib/libpcap.so -> libpcap.so.1 lrwxrwxrwx 1
root root 16 Sep 29 14:06
/opt/snort-build/lib/libpcap.so.1 -> libpcap.so.1.7.4 -rwxr-xr-x 1
root root 520356 Sep 29 14:06
/opt/snort-build/lib/libpcap.so.1.7.4
[root@x88022 ~]#

-----Original Message-----
From: Al Lewis (allewi) [mailto:allewi () cisco com]
Sent: Tuesday, September 29, 2015 3:05 PM
To: Lamont, Brian A.
Cc: snort-users () lists sourceforge net
Subject: RE: [Snort-users] 32bit snort rpm

Try running ldconfig or exporting the library path "export
LD_LIBRARY_PATH=/usr/local/lib" before running snort

Albert Lewis
QA Software Engineer
SOURCEfire, Inc. now part of Cisco
9780 Patuxent Woods Drive
Columbia, MD 21046
Phone: (office) 443.430.7112
Email: allewi () cisco com

-----Original Message-----
From: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]
Sent: Tuesday, September 29, 2015 6:02 PM
To: Al Lewis (allewi)
Cc: snort-users () lists sourceforge net
Subject: RE: [Snort-users] 32bit snort rpm

Got libpcap, daq and snort installed. Will see if it works 
tomorrow.
I had built a snort rpm but after successful daq and libpcap
install, it complained about unable to find libpcap and one other.

[root@x88022 i386]# rpm -i snort-2.9.7.5-1.i386.rpm
error: Failed dependencies:
libpcap.so.1 is needed by snort-2.9.7.5-1.i386
libsfbpf.so.0 is needed by snort-2.9.7.5-1.i386

-----Original Message-----
From: Al Lewis (allewi) [mailto:allewi () cisco com]
Sent: Monday, September 28, 2015 5:22 PM
To: Lamont, Brian A.
Cc: snort-users () lists sourceforge net
Subject: RE: [Snort-users] 32bit snort rpm

I have it installed on RHEL 5.11.

See below:

[root@localhost snort-2.9.7.6]# /var/tmp/snort-2.9.6/bin/snort -V

,,_ -*> Snort! <*-
o" )~ Version 2.9.7.6 GRE (Build 285) '''' By Martin Roesch & The
Snort Team:
http://www.snort.org/contact#team [4] Copyright (C) 2014-2015 Cisco
and/or its affiliates. All rights reserved.
Copyright (C) 1998-2013 Sourcefire, Inc., et al.
Using libpcap version 1.7.4
Using PCRE version: 8.37 2015-04-28 Using ZLIB version: 1.2.3

[root@localhost snort-2.9.7.6]# uname -a Linux
localhost.localdomain
2.6.18-398.el5 #1 SMP Tue Aug 12 06:26:57 EDT
2014 i686 i686 i386 GNU/Linux

[root@localhost snort-2.9.7.6]# cat /etc/redhat-release Red Hat
Enterprise Linux Server release 5.11 (Tikanga)

Hope this helps.

Albert Lewis
QA Software Engineer
SOURCEfire, Inc. now part of Cisco
9780 Patuxent Woods Drive
Columbia, MD 21046
Phone: (office) 443.430.7112
Email: allewi () cisco com

-----Original Message-----
From: Al Lewis (allewi)
Sent: Monday, September 28, 2015 7:34 PM
To: Lamont, Brian A.
Cc: snort-users () lists sourceforge net
Subject: Re: [Snort-users] 32bit snort rpm

Add "inlcude /usr/local/lib" to /etc/ld.so.conf.

[root@localhost alewis]# ls -al /usr/local/lib/libpcap.so.1
lrwxrwxrwx 1 root root 16 Sep 28 18:49 /usr/local/lib/libpcap.so.1
-> libpcap.so.1.7.4

[root@localhost alewis]# ldconfig -v /usr/local/lib | grep pcap
ldconfig: Can't stat inlcude /usr/local/lib: No such file or
directory
libpcap.so.1 -> libpcap.so.1.7.4
libpcap.so.0.9.4 -> libpcap.so.0.9.4 [root@localhost alewis]#

You should be able to continue after that.

I just did it with daq-2.0.5

Albert Lewis
QA Software Engineer
SOURCEfire, Inc. now part of Cisco
9780 Patuxent Woods Drive
Columbia, MD 21046
Phone: (office) 443.430.7112
Email: allewi () cisco com

-----Original Message-----
From: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]
Sent: Monday, September 28, 2015 6:57 PM
To: jlay () slave-tothe-box net; snort-users () lists sourceforge net
Subject: Re: [Snort-users] 32bit snort rpm

Building in its own area sounds great, but I'm still not getting
passed the make.
.
.
config.status: creating pcap_set_tstamp_precision.3pcap
config.status: creating pcap_set_tstamp_type.3pcap
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing default-1 commands

[root@x88022 libpcap-1.7.4]# make
gcc -fpic -I. -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
-DHAVE_CONFIG_H -D_U_="__attribute__((unused))" -g -O2 -c
./pcap-dbus.c
./pcap-dbus.c: In function ‘dbus_write’:
./pcap-dbus.c:111: error: ‘DBUS_ERROR_INIT’ undeclared (first use
in this function)
./pcap-dbus.c:111: error: (Each undeclared identifier is reported
only once
./pcap-dbus.c:111: error: for each function it appears in.)
./pcap-dbus.c: In function ‘dbus_activate’:
./pcap-dbus.c:165: error: ‘DBUS_ERROR_INIT’ undeclared (first use
in this function)
make: *** [pcap-dbus.o] Error 1

-----Original Message-----
From: James Lay [mailto:jlay () slave-tothe-box net]
Sent: Monday, September 28, 2015 2:24 PM
To: snort-users () lists sourceforge net
Subject: Re: [Snort-users] 32bit snort rpm

On 2015-09-28 02:12 PM, Lamont, Brian A. wrote:

daq is still needing 1.0.0 back to the beginning it looks like.






------







checking for libpcap version >= "1.0.0"... no







ERROR! Libpcap library version >= 1.0.0 not found.







Get it from http://www.tcpdump.org [1] [1]







-----------







So I found these options and ran it. But I'm not sure if it daq
built



"without" libpcap-1.0.0, and instead, or WITH the 1.7.4 library in



/usr/local/lib, which seemed like a default but specified it
anyway.



Libpcap install config.log completed without errors. Do any of you
see



an issue with the way this built?







./configure --disable-pcap-module



--with-libpcap-libraries=/usr/local/lib







FROM: Lamont, Brian A.



SENT: Monday, September 28, 2015 12:50 PM



TO: Lamont, Brian A.; Al Lewis (allewi); Russ Combs (rucombs);



Michael Steele



CC: snort-users () lists sourceforge net



SUBJECT: RE: [Snort-users] 32bit snort rpm







Got it to go with -enable-dbus=no.







FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]



SENT: Monday, September 28, 2015 12:39 PM



TO: Al Lewis (allewi); Russ Combs (rucombs); Michael Steele



CC: snort-users () lists sourceforge net



SUBJECT: Re: [Snort-users] 32bit snort rpm







I uninstalled libpcap 1.0.0 using make uninstall. Please let me
know



if this is complete clean removal. But during make install of
version



1.7 it errored below. Anyone seen this before?







./pcap-dbus.c: In function 'dbus_write':







./pcap-dbus.c:111: error: 'DBUS_ERROR_INIT' undeclared (first use
in



this function)







./pcap-dbus.c:111: error: (Each undeclared identifier is reported
only



once







./pcap-dbus.c:111: error: for each function it appears in.)







./pcap-dbus.c: In function 'dbus_activate':







./pcap-dbus.c:165: error: 'DBUS_ERROR_INIT' undeclared (first use
in



this function)







make: *** [pcap-dbus.o] Error 1







FROM: Al Lewis (allewi) [mailto:allewi () cisco com]



SENT: Monday, September 28, 2015 9:46 AM



TO: Lamont, Brian A.; Russ Combs (rucombs); Michael Steele



CC: snort-users () lists sourceforge net



SUBJECT: RE: [Snort-users] 32bit snort rpm







Try this..







Unistall libpcap.







Then get it from tcpdump.org [2]







http://www.tcpdump.org/#latest-release [3] [5]







Libpcap version 1.7 is available.







Albert Lewis







QA Software Engineer







SOURCEFIRE, Inc. now part of CISCO







9780 Patuxent Woods Drive



Columbia, MD 21046







Phone: (office) 443.430.7112







Email: allewi () cisco com







FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]



SENT: Monday, September 28, 2015 12:21 PM



TO: Al Lewis (allewi); Russ Combs (rucombs); Michael Steele



CC: snort-users () lists sourceforge net



SUBJECT: RE: [Snort-users] 32bit snort rpm







Tried that. And Redhat apparently does not have the 1.0.0
available,



which is odd given the "…years ago…" reference below. It may be
part



of another channel we are not subscribed to so I will open a case
with



them for that.







This system is receiving updates from RHN Classic or RHN 
Satellite.







Setting up Install Process







Package 14:libpcap-devel-0.9.4-15.el5.i386 already installed and



latest version







Nothing to do







FROM: Al Lewis (allewi) [mailto:allewi () cisco com]



SENT: Monday, September 28, 2015 9:17 AM



TO: Lamont, Brian A.; Russ Combs (rucombs); Michael Steele



CC: snort-users () lists sourceforge net



SUBJECT: RE: [Snort-users] 32bit snort rpm







For redhat libpcap devel is:







"yum install libpcap-devel"







Albert Lewis







QA Software Engineer







SOURCEFIRE, Inc. now part of CISCO







9780 Patuxent Woods Drive



Columbia, MD 21046







Phone: (office) 443.430.7112







Email: allewi () cisco com







FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]



SENT: Monday, September 28, 2015 12:00 PM



TO: Russ Combs (rucombs); Al Lewis (allewi); Michael Steele;



snort-users () lists sourceforge net



SUBJECT: RE: [Snort-users] 32bit snort rpm







Ok I'm back at this again. To recap, I'm trying to build snort
32bit



on rhel 5.11, but running in to dependency problems. While
starting a



rpmbuild of daq, I started seeing errors. Below is what ldd snort



shows on 64 linux. I found another site that suggested installing



libpcap-devel so that libpcap would build, then install daq, and
then



snort. But I have not been able to find libpcap-devel source pkg
to



download for Rhel 5 32bit.







Here is how my install of libpcap-1.0.0 finishes and appears







----------------------------------------------------------







/usr/bin/install -c -m 644 ./$i \







/usr/local/share/man/man3/$i; done







ln /usr/local/share/man/man3/pcap_datalink_val_to_name.3pcap \







/usr/local/share/man/man3/pcap_datalink_val_to_description.3pcap







ln: creating hard link



`/usr/local/share/man/man3/pcap_datalink_val_to_description.3pcap'
to



`/usr/local/share/man/man3/pcap_datalink_val_to_name.3pcap': File



exists







make: *** [install] Error 1







But my daq install errors unable to find libpcap







---------------------------------------------------------







checking for libpcap version >= "1.0.0"... no







ERROR! Libpcap library version >= 1.0.0 not found.







Get it from http://www.tcpdump.org [1] [1]







[root@linux1 ~]# ldd /usr/local/bin/snort







linux-vdso.so.1 => (0x00007fffb7ffd000)







libdnet.1 => /usr/lib64/libdnet.1 (0x00002ba25825d000)







libpcre.so.0 => /lib64/libpcre.so.0 (0x00002ba25846d000)







libnsl.so.1 => /lib64/libnsl.so.1 (0x00002ba25868c000)







libuuid.so.1 => /lib64/libuuid.so.1 (0x00002ba2588a5000)







libm.so.6 => /lib64/libm.so.6 (0x00002ba258aa9000)







libcrypto.so.6 => /lib64/libcrypto.so.6 (0x00002ba258d2c000)







libdl.so.2 => /lib64/libdl.so.2 (0x00002ba25907f000)







libsfbpf.so.0 => /usr/local/lib/libsfbpf.so.0 (0x00002ba259283000)







libpcap.so.1 => /usr/local/lib/libpcap.so.1 (0x00002ba2594a6000)







libz.so.1 => /lib64/libz.so.1 (0x00002ba2596e1000)







libpthread.so.0 => /lib64/libpthread.so.0 (0x00002ba2598f5000)







libc.so.6 => /lib64/libc.so.6 (0x00002ba259b11000)







/lib64/ld-linux-x86-64.so.2 (0x00002ba25803f000)







[root@linux1 ~]# snort -V







,,_ -*> Snort! <*-







o" )~ Version 2.9.7.0 GRE (Build 149)







'''' By Martin Roesch & The Snort Team:



http://www.snort.org/contact#team [4] [6]







Copyright (C) 2014 Cisco and/or its affiliates. All rights
reserved.







Copyright (C) 1998-2013 Sourcefire, Inc., et al.







USING LIBPCAP VERSION 1.6.2







Using PCRE version: 6.6 06-Feb-2006







Using ZLIB version: 1.2.3







FROM: Russ [mailto:rucombs () cisco com]



SENT: Tuesday, September 15, 2015 3:18 PM



TO: Lamont, Brian A.; Al Lewis (allewi); Michael Steele;



snort-users () lists sourceforge net



SUBJECT: Re: [Snort-users] 32bit snort rpm







On 9/15/15 5:43 PM, Lamont, Brian A. wrote:






So I'm a failure at building from the source rpm of daq, and pretty



darn new to building rpms, so my next attempt below is to build
from



source, and that didn't go well.







[root@x88022 snort]# rpmbuild --rebuild daq-2.0.6-1.src.rpm







Installing daq-2.0.6-1.src.rpm







error: unpacking of archive failed on file



/usr/src/redhat/SOURCES/daq-2.0.6.tar.gz;55f88cd3: cpio: MD5 sum



mismatch







error: daq-2.0.6-1.src.rpm cannot be installed







From source:







----------------







[root@x88022 snort]# cd daq-2.0.6







[root@x88022 daq-2.0.6]# vi README







[root@x88022 daq-2.0.6]# ./configure







checking for a BSD-compatible install... /usr/bin/install -c







checking whether build environment is sane... yes







checking for a thread-safe mkdir -p... /bin/mkdir -p







checking for gawk... gawk







.







. …omitted..







..







checking libnetfilter_queue/libnetfilter_queue.h presence... no







checking for libnetfilter_queue/libnetfilter_queue.h... no







checking for linux/netfilter.h... (cached) yes







checking for pcap.h... (cached) yes







checking for pcap_lib_version... checking for pcap_lib_version in



-lpcap... (cached) yes







checking for libpcap version >= "1.0.0"... no







ERROR! Libpcap library version >= 1.0.0 not found.







Get it from http://www.tcpdump.org [1] [1]







Current version of libpcap - same version on 64bit hosts and they



work fine.







---------------------------------







[root@x88022 daq-2.0.6]# rpm -qa |grep libpcap







libpcap-devel-0.9.4-15.el5







libpcap-0.9.4-15.el5







We started requiring 1.0.0+ years ago. On those 64-bit hosts, what



does ldd snort show? Is that where rpm installed those? You can
also



check snort -V to see the version.







FROM: Al Lewis (allewi) [mailto:allewi () cisco com]



SENT: Tuesday, September 15, 2015 12:05 PM



TO: Lamont, Brian A.; Michael Steele;



snort-users () lists sourceforge net



SUBJECT: RE: [Snort-users] 32bit snort rpm







You should be able to build from source but you need the daq
installed



first.







Albert Lewis







QA Software Engineer







SOURCEFIRE, Inc. now part of CISCO







9780 Patuxent Woods Drive



Columbia, MD 21046







Phone: (office) 443.430.7112







Email: allewi () cisco com







FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]



SENT: Tuesday, September 15, 2015 10:39 AM



TO: Al Lewis (allewi); Michael Steele;



snort-users () lists sourceforge net



SUBJECT: RE: [Snort-users] 32bit snort rpm







I am needing to install snort on approx.. 25 32bit RHEL (REDHAT
LINUX)



5 servers







FROM: Al Lewis (allewi) [mailto:allewi () cisco com]



SENT: Monday, September 14, 2015 7:10 PM



TO: Lamont, Brian A.; Michael Steele;



snort-users () lists sourceforge net



SUBJECT: RE: [Snort-users] 32bit snort rpm







Are you trying to install on windows or *nix?







Albert Lewis







QA Software Engineer







SOURCEFIRE, Inc. now part of CISCO







9780 Patuxent Woods Drive



Columbia, MD 21046







Phone: (office) 443.430.7112







Email: allewi () cisco com







FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]



SENT: Monday, September 14, 2015 7:00 PM



TO: Michael Steele; snort-users () lists sourceforge net



SUBJECT: Re: [Snort-users] 32bit snort rpm







But I should be able to build from source, at least according to
one



of the README files, correct? I have started one build after



installing the libpcap and other prereqs, and it started to take
off



and look like a build, then failed for the error below. Where can I



find the sfbpf library?







[root@x88022 snort]# rpmbuild -ta snort-2.9.7.5.tar.gz







Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.9801







+ umask 022







+ cd /usr/src/redhat/BUILD







+ LANG=C







+ export LANG







+ unset DISPLAY







+ cd /usr/src/redhat/BUILD







+ rm -rf snort-2.9.7.5







+ /usr/bin/gzip -dc /var/tmp/snort/snort-2.9.7.5.tar.gz







.







..







checking for INADDR_NONE... yes







checking for __FUNCTION__... yes







checking for sfbpf_compile in -lsfbpf... no







ERROR! sfbpf library not found, go get it from







http://www.snort.org/ [5] [7].







error: Bad exit status from /var/tmp/rpm-tmp.9801 (%build)







RPM build errors:







Bad exit status from /var/tmp/rpm-tmp.9801 (%build)







FROM: Michael Steele [mailto:michaels () winsnort com]



SENT: Monday, September 14, 2015 3:37 PM



TO: Lamont, Brian A.



SUBJECT: RE: [Snort-users] 32bit snort rpm







Snort is 32bit for Window, but the remainder of the support
programs



are 64bit. There are 32bit and 64bit installation tutorials for



Windows.







Kindest regards,







Michael...







WINSNORT.com [6] Management Team Member







--







****************** Established ~ 2001 *******************







* Visit Us @ http://www.winsnort.com [7] [8] *







* ~~ FREE WinIDS Snort installation guides ~~ *







* ~~ FREE support forums ~~ *







* Snort: Open Source Network IDS - http://www.snort.org [8] [9] *







*********************************************************







FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]



SENT: Monday, September 14, 2015 6:22 PM



TO: snort-users () lists sourceforge net



SUBJECT: [Snort-users] 32bit snort rpm







I am needing to install snort on approx.. 25 32bit Rhel 5 servers.
I



see there is a 64bit rpm on the website. Is there a 32bit package



available?







_BRIAN LAMONT_







UNIX SYSTEMS ADMIN







DESK: 480 586-9986







CELL: 480 209-8751







brian.lamont () gd-ms com


 If this was me, at this point, I would just create snort and it's
dependencies in their own environment(with a little fudging) like 
so:

 libpcap:
 snag latest at http://www.tcpdump.org/release/libpcap-1.7.4.tar.gz
[9]
 ./configure --prefix=/opt/snortbuild

 sudo ln -s /opt/snortbuild/bin/pcap-config /usr/sbin/

 For some reason daq has issues with finding libpcap.so.1 so:
 (as root) echo "/opt/snortbuild/lib" > /etc/ld.so.conf.d/snort.conf
(or symlink it to your lib path)

 libdnet:
 snag latest at

http://pkgs.fedoraproject.org/repo/pkgs/libdnet/libdnet-1.12.tgz/925
3 e f6de1b5e28e9c9a62b882e44cc9/libdnet-1.12.tgz
[10]
 and ./configure --prefix=/opt/snortbuild

 sudo ln -s /opt/snortbuild/bin/dnet-config /usr/bin/

 daq:
 snag latest at
https://www.snort.org/downloads/snort/daq-2.0.6.tar.gz
[11]
 ./configure --prefix=/opt/snort
 --with-libpcap-includes=/opt/snortbuild/include
 --with-libpcap-libraries=/opt/snortbuild/lib
 --with-dnet-includes=/opt/snortbuild/include
 --with-dnet-libraries=/opt/snortbuild/lib

 sudo ln -s /opt/snortbuild/bin/daq-modules-config /usr/bin/

 snort:
 snag at https://www.snort.org/downloads/snort/snort-2.9.7.5.tar.gz
[12] and configure with ./configure --prefix=/opt/snort
--enable-sourcefire --with-daq-includes=/opt/snortbuild/include
 --with-daq-libraries=/opt/snortbuild/lib
 --with-dnet-includes=/opt/snortbuild/include
 --with-dnet-libraries=/opt/snortbuild/lib
 --with-libpcap-includes=/opt/snortbuild/include
 --with-libpcap-libraries=/opt/snortbuild/lib

 snort refuses to find libdnet.1 so you'll need to make a symlink to
your lib path such as: sudo ln -s /opt/snortbuild/lib/libdnet.1.0.1
 /lib/i386-linux-gnu/libdnet.1

 vbox:/opt/snort/bin$ ldd snort
 linux-gate.so.1 => (0xb7759000)
 libdnet.1 => /lib/i386-linux-gnu/libdnet.1 (0xb772c000)
 libpcre.so.3 => /lib/i386-linux-gnu/libpcre.so.3 (0xb76ba000)
 libm.so.6 => /lib/i386-linux-gnu/libm.so.6 (0xb766c000)
 libcrypto.so.1.0.0 => /lib/i386-linux-gnu/libcrypto.so.1.0.0
 (0xb7498000)
 libdl.so.2 => /lib/i386-linux-gnu/libdl.so.2 (0xb7493000)
 libsfbpf.so.0 => /opt/snortbuild/lib/libsfbpf.so.0 (0xb746b000)
 libpcap.so.1 => /opt/snortbuild/lib/libpcap.so.1 (0xb7425000)
 libz.so.1 => /lib/i386-linux-gnu/libz.so.1 (0xb7409000)
 libpthread.so.0 => /lib/i386-linux-gnu/libpthread.so.0 (0xb73ec000)
 libc.so.6 => /lib/i386-linux-gnu/libc.so.6 (0xb7231000)
 /lib/ld-linux.so.2 (0xb775a000)

 vbox:/opt/snort/bin$ ./snort --version

 ,,_ -*> Snort! <*-
 o" )~ Version 2.9.7.5 GRE (Build 262)  '''' By Martin Roesch & The
Snort Team:
 http://www.snort.org/contact#team [4]  Copyright (C) 2014-2015
Cisco and/or its affiliates. All rights reserved.
 Copyright (C) 1998-2013 Sourcefire, Inc., et al.
 Using libpcap version 1.7.4
 Using PCRE version: 8.35 2014-04-04  Using ZLIB version: 1.2.8

 At this point if you want to push this out as a package you can
tar.bz2 /opt/snortbuild and /opt/snort as well as the lib symlinks
and away you go. Hope that helps.

 James





---------------------------------------------------------------------
-
-------- _______________________________________________
Snort-users mailing list
Snort-users () lists sourceforge net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/listinfo/snort-users
Snort-users list archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=snort-users

Please visit http://blog.snort.org to stay current on all the latest
Snort news!
---------------------------------------------------------------------
-
-------- _______________________________________________
Snort-users mailing list
Snort-users () lists sourceforge net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/listinfo/snort-users
Snort-users list archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=snort-users

Please visit http://blog.snort.org to stay current on all the latest
Snort news!



----------------------------------------------------------------------
-------- _______________________________________________
Snort-users mailing list
Snort-users () lists sourceforge net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/listinfo/snort-users
Snort-users list archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=snort-users

Please visit http://blog.snort.org to stay current on all the latest
Snort news!



------------------------------------------------------------------------------
_______________________________________________
Snort-users mailing list
Snort-users () lists sourceforge net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/listinfo/snort-users
Snort-users list archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=snort-users

Please visit http://blog.snort.org to stay current on all the latest Snort news!
Previous By Date Next
Previous By Thread Next

Current thread: