Snort mailing list archives

Previous By Date Next
Previous By Thread Next

Re: 32bit snort rpm

From: "Lamont, Brian A." <Brian.Lamont () gd-ms com>
Date: Wed, 30 Sep 2015 23:29:21 +0000
Appears to be a library linkage that’s not right, and maybe it's obvious but I don't chase these issues much.   So 
while I continue to look I'll send you what I have.   

Since we installed libpcap.so.1.7.4, I'm guessing we need to make sure libpcap.so.1 can find it.  In the  startup 
script I have LD_LIBRARY_PATH exported as follows:

LD_LIBRARY_PATH=/opt/snort-build/lib:/usr/local/lib;        export LD_LIBRARY_PATH;


The error
---
[root@x88022 rc3.d]# ./S99snortd start
/usr/local/bin/snort: error while loading shared libraries: /usr/local/lib/libpcap.so.1: cannot read file data: Error 21


Links to libpcap.so.1 
---
[root@x88022 ~]# ls -al /usr/local/lib/libpcap*
lrwxrwxrwx 1 root root 20 Sep 29 14:42 /usr/local/lib/libpcap.so.1 -> /opt/snort-build/lib


/opt/snort-build is where is built snort and all packages.
---
[root@x88022 ~]# ls -al /opt/snort-build/lib/libpcap*
-rw-r--r-- 1 root root 695832 Sep 29 14:06 /opt/snort-build/lib/libpcap.a
lrwxrwxrwx 1 root root     12 Sep 29 14:06 /opt/snort-build/lib/libpcap.so -> libpcap.so.1
lrwxrwxrwx 1 root root     16 Sep 29 14:06 /opt/snort-build/lib/libpcap.so.1 -> libpcap.so.1.7.4
-rwxr-xr-x 1 root root 520356 Sep 29 14:06 /opt/snort-build/lib/libpcap.so.1.7.4
[root@x88022 ~]#



-----Original Message-----
From: Al Lewis (allewi) [mailto:allewi () cisco com] 
Sent: Tuesday, September 29, 2015 3:05 PM
To: Lamont, Brian A.
Cc: snort-users () lists sourceforge net
Subject: RE: [Snort-users] 32bit snort rpm

Try running ldconfig or exporting the library path "export LD_LIBRARY_PATH=/usr/local/lib" before running snort


Albert Lewis
QA Software Engineer
SOURCEfire, Inc. now part of Cisco
9780 Patuxent Woods Drive
Columbia, MD 21046
Phone: (office) 443.430.7112
Email: allewi () cisco com 

-----Original Message-----
From: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]
Sent: Tuesday, September 29, 2015 6:02 PM
To: Al Lewis (allewi)
Cc: snort-users () lists sourceforge net
Subject: RE: [Snort-users] 32bit snort rpm

Got libpcap, daq and snort installed.   Will see if it works tomorrow.    I had built a snort  rpm but after successful 
daq and libpcap install, it complained about unable to find libpcap and one other.

[root@x88022 i386]# rpm -i snort-2.9.7.5-1.i386.rpm
error: Failed dependencies:
        libpcap.so.1 is needed by snort-2.9.7.5-1.i386
        libsfbpf.so.0 is needed by snort-2.9.7.5-1.i386



-----Original Message-----
From: Al Lewis (allewi) [mailto:allewi () cisco com]
Sent: Monday, September 28, 2015 5:22 PM
To: Lamont, Brian A.
Cc: snort-users () lists sourceforge net
Subject: RE: [Snort-users] 32bit snort rpm

I have it installed on RHEL 5.11. 

See below:


[root@localhost snort-2.9.7.6]# /var/tmp/snort-2.9.6/bin/snort -V

   ,,_     -*> Snort! <*-
  o"  )~   Version 2.9.7.6 GRE (Build 285)
   ''''    By Martin Roesch & The Snort Team: http://www.snort.org/contact#team
           Copyright (C) 2014-2015 Cisco and/or its affiliates. All rights reserved.
           Copyright (C) 1998-2013 Sourcefire, Inc., et al.
           Using libpcap version 1.7.4
           Using PCRE version: 8.37 2015-04-28
           Using ZLIB version: 1.2.3

[root@localhost snort-2.9.7.6]# uname -a Linux localhost.localdomain 2.6.18-398.el5 #1 SMP Tue Aug 12 06:26:57 EDT 2014 
i686 i686 i386 GNU/Linux


[root@localhost snort-2.9.7.6]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.11 (Tikanga)


Hope this helps.

Albert Lewis
QA Software Engineer
SOURCEfire, Inc. now part of Cisco
9780 Patuxent Woods Drive
Columbia, MD 21046
Phone: (office) 443.430.7112
Email: allewi () cisco com 


-----Original Message-----
From: Al Lewis (allewi)
Sent: Monday, September 28, 2015 7:34 PM
To: Lamont, Brian A.
Cc: snort-users () lists sourceforge net
Subject: Re: [Snort-users] 32bit snort rpm

Add "inlcude /usr/local/lib" to /etc/ld.so.conf.


[root@localhost alewis]# ls -al /usr/local/lib/libpcap.so.1 lrwxrwxrwx 1 root root 16 Sep 28 18:49 
/usr/local/lib/libpcap.so.1 -> libpcap.so.1.7.4


[root@localhost alewis]# ldconfig -v /usr/local/lib | grep pcap
ldconfig: Can't stat inlcude /usr/local/lib: No such file or directory
        libpcap.so.1 -> libpcap.so.1.7.4
        libpcap.so.0.9.4 -> libpcap.so.0.9.4 [root@localhost alewis]#


You should be able to continue after that.

I just did it with daq-2.0.5



Albert Lewis
QA Software Engineer
SOURCEfire, Inc. now part of Cisco
9780 Patuxent Woods Drive
Columbia, MD 21046
Phone: (office) 443.430.7112
Email: allewi () cisco com 

-----Original Message-----
From: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]
Sent: Monday, September 28, 2015 6:57 PM
To: jlay () slave-tothe-box net; snort-users () lists sourceforge net
Subject: Re: [Snort-users] 32bit snort rpm

Building in its own area sounds great, but I'm still not getting passed the make.
.
.
config.status: creating pcap_set_tstamp_precision.3pcap
config.status: creating pcap_set_tstamp_type.3pcap
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing default-1 commands

[root@x88022 libpcap-1.7.4]# make
gcc -fpic -I.  -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include   -DHAVE_CONFIG_H  -D_U_="__attribute__((unused))" 
-g -O2    -c ./pcap-dbus.c
./pcap-dbus.c: In function ‘dbus_write’:
./pcap-dbus.c:111: error: ‘DBUS_ERROR_INIT’ undeclared (first use in this function)
./pcap-dbus.c:111: error: (Each undeclared identifier is reported only once
./pcap-dbus.c:111: error: for each function it appears in.)
./pcap-dbus.c: In function ‘dbus_activate’:
./pcap-dbus.c:165: error: ‘DBUS_ERROR_INIT’ undeclared (first use in this function)
make: *** [pcap-dbus.o] Error 1




-----Original Message-----
From: James Lay [mailto:jlay () slave-tothe-box net]
Sent: Monday, September 28, 2015 2:24 PM
To: snort-users () lists sourceforge net
Subject: Re: [Snort-users] 32bit snort rpm

On 2015-09-28 02:12 PM, Lamont, Brian A. wrote:

daq is still needing 1.0.0 back to the beginning it looks like.

------

checking for libpcap version >= "1.0.0"... no

 ERROR! Libpcap library version >= 1.0.0 not found.

 Get it from http://www.tcpdump.org [1]

-----------

So I found these options and ran it. But I'm not sure if it daq built 
"without" libpcap-1.0.0, and instead, or WITH the 1.7.4 library in 
/usr/local/lib, which seemed like a default but specified it anyway.
Libpcap install config.log completed without errors. Do any of you see 
an issue with the way this built?

./configure --disable-pcap-module
--with-libpcap-libraries=/usr/local/lib

FROM: Lamont, Brian A.
 SENT: Monday, September 28, 2015 12:50 PM
 TO: Lamont, Brian A.; Al Lewis (allewi); Russ Combs (rucombs); 
Michael Steele
 CC: snort-users () lists sourceforge net
 SUBJECT: RE: [Snort-users] 32bit snort rpm

Got it to go with -enable-dbus=no.

FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]
 SENT: Monday, September 28, 2015 12:39 PM
 TO: Al Lewis (allewi); Russ Combs (rucombs); Michael Steele
 CC: snort-users () lists sourceforge net
 SUBJECT: Re: [Snort-users] 32bit snort rpm

I uninstalled libpcap 1.0.0 using make uninstall. Please let me know 
if this is complete clean removal. But during make install of version
1.7 it errored below. Anyone seen this before?

./pcap-dbus.c: In function 'dbus_write':

./pcap-dbus.c:111: error: 'DBUS_ERROR_INIT' undeclared (first use in 
this function)

./pcap-dbus.c:111: error: (Each undeclared identifier is reported only 
once

./pcap-dbus.c:111: error: for each function it appears in.)

./pcap-dbus.c: In function 'dbus_activate':

./pcap-dbus.c:165: error: 'DBUS_ERROR_INIT' undeclared (first use in 
this function)

make: *** [pcap-dbus.o] Error 1

FROM: Al Lewis (allewi) [mailto:allewi () cisco com]
 SENT: Monday, September 28, 2015 9:46 AM
 TO: Lamont, Brian A.; Russ Combs (rucombs); Michael Steele
 CC: snort-users () lists sourceforge net
 SUBJECT: RE: [Snort-users] 32bit snort rpm

Try this..

Unistall libpcap.

Then get it from tcpdump.org

http://www.tcpdump.org/#latest-release [5]

Libpcap version 1.7 is available.

Albert Lewis

QA Software Engineer

SOURCEFIRE, Inc. now part of CISCO

9780 Patuxent Woods Drive
 Columbia, MD 21046

Phone: (office) 443.430.7112

Email: allewi () cisco com

FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]
 SENT: Monday, September 28, 2015 12:21 PM
 TO: Al Lewis (allewi); Russ Combs (rucombs); Michael Steele
 CC: snort-users () lists sourceforge net
 SUBJECT: RE: [Snort-users] 32bit snort rpm

Tried that. And Redhat apparently does not have the 1.0.0 available, 
which is odd given the "…years ago…" reference below. It may be part 
of another channel we are not subscribed to so I will open a case with 
them for that.

This system is receiving updates from RHN Classic or RHN Satellite.

Setting up Install Process

Package 14:libpcap-devel-0.9.4-15.el5.i386 already installed and 
latest version

Nothing to do

FROM: Al Lewis (allewi) [mailto:allewi () cisco com]
 SENT: Monday, September 28, 2015 9:17 AM
 TO: Lamont, Brian A.; Russ Combs (rucombs); Michael Steele
 CC: snort-users () lists sourceforge net
 SUBJECT: RE: [Snort-users] 32bit snort rpm

For redhat libpcap devel is:

"yum install libpcap-devel"

Albert Lewis

QA Software Engineer

SOURCEFIRE, Inc. now part of CISCO

9780 Patuxent Woods Drive
 Columbia, MD 21046

Phone: (office) 443.430.7112

Email: allewi () cisco com

FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]
 SENT: Monday, September 28, 2015 12:00 PM
 TO: Russ Combs (rucombs); Al Lewis (allewi); Michael Steele; 
snort-users () lists sourceforge net
 SUBJECT: RE: [Snort-users] 32bit snort rpm

Ok I'm back at this again. To recap, I'm trying to build snort 32bit 
on rhel 5.11, but running in to dependency problems. While starting a 
rpmbuild of daq, I started seeing errors. Below is what ldd snort 
shows on 64 linux. I found another site that suggested installing 
libpcap-devel so that libpcap would build, then install daq, and then 
snort. But I have not been able to find libpcap-devel source pkg to 
download for Rhel 5 32bit.

Here is how my install of libpcap-1.0.0 finishes and appears

----------------------------------------------------------

 /usr/bin/install -c -m 644 ./$i \

 /usr/local/share/man/man3/$i; done

ln /usr/local/share/man/man3/pcap_datalink_val_to_name.3pcap \

 /usr/local/share/man/man3/pcap_datalink_val_to_description.3pcap

ln: creating hard link
`/usr/local/share/man/man3/pcap_datalink_val_to_description.3pcap' to
`/usr/local/share/man/man3/pcap_datalink_val_to_name.3pcap': File 
exists

make: *** [install] Error 1

But my daq install errors unable to find libpcap

---------------------------------------------------------

checking for libpcap version >= "1.0.0"... no

 ERROR! Libpcap library version >= 1.0.0 not found.

 Get it from http://www.tcpdump.org [1]

[root@linux1 ~]# ldd /usr/local/bin/snort

 linux-vdso.so.1 => (0x00007fffb7ffd000)

 libdnet.1 => /usr/lib64/libdnet.1 (0x00002ba25825d000)

 libpcre.so.0 => /lib64/libpcre.so.0 (0x00002ba25846d000)

 libnsl.so.1 => /lib64/libnsl.so.1 (0x00002ba25868c000)

 libuuid.so.1 => /lib64/libuuid.so.1 (0x00002ba2588a5000)

 libm.so.6 => /lib64/libm.so.6 (0x00002ba258aa9000)

 libcrypto.so.6 => /lib64/libcrypto.so.6 (0x00002ba258d2c000)

 libdl.so.2 => /lib64/libdl.so.2 (0x00002ba25907f000)

 libsfbpf.so.0 => /usr/local/lib/libsfbpf.so.0 (0x00002ba259283000)

 libpcap.so.1 => /usr/local/lib/libpcap.so.1 (0x00002ba2594a6000)

 libz.so.1 => /lib64/libz.so.1 (0x00002ba2596e1000)

 libpthread.so.0 => /lib64/libpthread.so.0 (0x00002ba2598f5000)

 libc.so.6 => /lib64/libc.so.6 (0x00002ba259b11000)

 /lib64/ld-linux-x86-64.so.2 (0x00002ba25803f000)

[root@linux1 ~]# snort -V

 ,,_ -*> Snort! <*-

 o" )~ Version 2.9.7.0 GRE (Build 149)

 '''' By Martin Roesch & The Snort Team:
http://www.snort.org/contact#team [6]

 Copyright (C) 2014 Cisco and/or its affiliates. All rights reserved.

 Copyright (C) 1998-2013 Sourcefire, Inc., et al.

 USING LIBPCAP VERSION 1.6.2

 Using PCRE version: 6.6 06-Feb-2006

 Using ZLIB version: 1.2.3

FROM: Russ [mailto:rucombs () cisco com]
 SENT: Tuesday, September 15, 2015 3:18 PM
 TO: Lamont, Brian A.; Al Lewis (allewi); Michael Steele; 
snort-users () lists sourceforge net
 SUBJECT: Re: [Snort-users] 32bit snort rpm

On 9/15/15 5:43 PM, Lamont, Brian A. wrote:


So I'm a failure at building from the source rpm of daq, and pretty 
darn new to building rpms, so my next attempt below is to build from 
source, and that didn't go well.

[root@x88022 snort]# rpmbuild --rebuild daq-2.0.6-1.src.rpm

Installing daq-2.0.6-1.src.rpm

error: unpacking of archive failed on file
/usr/src/redhat/SOURCES/daq-2.0.6.tar.gz;55f88cd3: cpio: MD5 sum 
mismatch

error: daq-2.0.6-1.src.rpm cannot be installed

From source:

----------------

[root@x88022 snort]# cd daq-2.0.6

[root@x88022 daq-2.0.6]# vi README

[root@x88022 daq-2.0.6]# ./configure

checking for a BSD-compatible install... /usr/bin/install -c

checking whether build environment is sane... yes

checking for a thread-safe mkdir -p... /bin/mkdir -p

checking for gawk... gawk

.

. …omitted..

..

checking libnetfilter_queue/libnetfilter_queue.h presence... no

checking for libnetfilter_queue/libnetfilter_queue.h... no

checking for linux/netfilter.h... (cached) yes

checking for pcap.h... (cached) yes

checking for pcap_lib_version... checking for pcap_lib_version in 
-lpcap... (cached) yes

checking for libpcap version >= "1.0.0"... no

ERROR! Libpcap library version >= 1.0.0 not found.

Get it from http://www.tcpdump.org [1]

Current version of libpcap - same version on 64bit hosts and they 
work fine.

---------------------------------

[root@x88022 daq-2.0.6]# rpm -qa |grep libpcap

libpcap-devel-0.9.4-15.el5

libpcap-0.9.4-15.el5


We started requiring 1.0.0+ years ago. On those 64-bit hosts, what 
does ldd snort show? Is that where rpm installed those? You can also 
check snort -V to see the version.

FROM: Al Lewis (allewi) [mailto:allewi () cisco com]
 SENT: Tuesday, September 15, 2015 12:05 PM
 TO: Lamont, Brian A.; Michael Steele; 
snort-users () lists sourceforge net
 SUBJECT: RE: [Snort-users] 32bit snort rpm

You should be able to build from source but you need the daq installed 
first.

Albert Lewis

QA Software Engineer

SOURCEFIRE, Inc. now part of CISCO

9780 Patuxent Woods Drive
 Columbia, MD 21046

Phone: (office) 443.430.7112

Email: allewi () cisco com

FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]
 SENT: Tuesday, September 15, 2015 10:39 AM
 TO: Al Lewis (allewi); Michael Steele; 
snort-users () lists sourceforge net
 SUBJECT: RE: [Snort-users] 32bit snort rpm

I am needing to install snort on approx.. 25 32bit RHEL (REDHAT LINUX)
5 servers

FROM: Al Lewis (allewi) [mailto:allewi () cisco com]
 SENT: Monday, September 14, 2015 7:10 PM
 TO: Lamont, Brian A.; Michael Steele; 
snort-users () lists sourceforge net
 SUBJECT: RE: [Snort-users] 32bit snort rpm

Are you trying to install on windows or *nix?

Albert Lewis

QA Software Engineer

SOURCEFIRE, Inc. now part of CISCO

9780 Patuxent Woods Drive
 Columbia, MD 21046

Phone: (office) 443.430.7112

Email: allewi () cisco com

FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]
 SENT: Monday, September 14, 2015 7:00 PM
 TO: Michael Steele; snort-users () lists sourceforge net
 SUBJECT: Re: [Snort-users] 32bit snort rpm

But I should be able to build from source, at least according to one 
of the README files, correct? I have started one build after 
installing the libpcap and other prereqs, and it started to take off 
and look like a build, then failed for the error below. Where can I 
find the sfbpf library?

[root@x88022 snort]# rpmbuild -ta snort-2.9.7.5.tar.gz

Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.9801

+ umask 022

+ cd /usr/src/redhat/BUILD

+ LANG=C

+ export LANG

+ unset DISPLAY

+ cd /usr/src/redhat/BUILD

+ rm -rf snort-2.9.7.5

+ /usr/bin/gzip -dc /var/tmp/snort/snort-2.9.7.5.tar.gz

.

..

checking for INADDR_NONE... yes

checking for __FUNCTION__... yes

checking for sfbpf_compile in -lsfbpf... no

 ERROR! sfbpf library not found, go get it from

 http://www.snort.org/ [7].

error: Bad exit status from /var/tmp/rpm-tmp.9801 (%build)

RPM build errors:

 Bad exit status from /var/tmp/rpm-tmp.9801 (%build)

FROM: Michael Steele [mailto:michaels () winsnort com]
 SENT: Monday, September 14, 2015 3:37 PM
 TO: Lamont, Brian A.
 SUBJECT: RE: [Snort-users] 32bit snort rpm

Snort is 32bit for Window, but the remainder of the support programs 
are 64bit. There are 32bit and 64bit installation tutorials for 
Windows.

Kindest regards,

Michael...

WINSNORT.com Management Team Member

--

****************** Established ~ 2001 *******************

* Visit Us @ http://www.winsnort.com [8] *

* ~~ FREE WinIDS Snort installation guides ~~ *

* ~~ FREE support forums ~~ *

* Snort: Open Source Network IDS - http://www.snort.org [9] *

*********************************************************

FROM: Lamont, Brian A. [mailto:Brian.Lamont () gd-ms com]
 SENT: Monday, September 14, 2015 6:22 PM
 TO: snort-users () lists sourceforge net
 SUBJECT: [Snort-users] 32bit snort rpm

I am needing to install snort on approx.. 25 32bit Rhel 5 servers. I 
see there is a 64bit rpm on the website. Is there a 32bit package 
available?

_BRIAN LAMONT_

UNIX SYSTEMS ADMIN

DESK:  480 586-9986

CELL:     480 209-8751

brian.lamont () gd-ms com


If this was me, at this point, I would just create snort and it's dependencies in their own environment(with a little 
fudging) like so:

libpcap:
snag latest at http://www.tcpdump.org/release/libpcap-1.7.4.tar.gz
./configure --prefix=/opt/snortbuild

sudo ln -s /opt/snortbuild/bin/pcap-config /usr/sbin/


For some reason daq has issues with finding libpcap.so.1 so:
(as root) echo "/opt/snortbuild/lib" > /etc/ld.so.conf.d/snort.conf (or symlink it to your lib path)

libdnet:
snag latest at
http://pkgs.fedoraproject.org/repo/pkgs/libdnet/libdnet-1.12.tgz/9253ef6de1b5e28e9c9a62b882e44cc9/libdnet-1.12.tgz
and ./configure --prefix=/opt/snortbuild

sudo ln -s /opt/snortbuild/bin/dnet-config /usr/bin/


daq:
snag latest at https://www.snort.org/downloads/snort/daq-2.0.6.tar.gz
./configure --prefix=/opt/snort
--with-libpcap-includes=/opt/snortbuild/include
--with-libpcap-libraries=/opt/snortbuild/lib
--with-dnet-includes=/opt/snortbuild/include
--with-dnet-libraries=/opt/snortbuild/lib

sudo ln -s /opt/snortbuild/bin/daq-modules-config /usr/bin/


snort:
snag at https://www.snort.org/downloads/snort/snort-2.9.7.5.tar.gz and configure with ./configure --prefix=/opt/snort 
--enable-sourcefire --with-daq-includes=/opt/snortbuild/include
--with-daq-libraries=/opt/snortbuild/lib
--with-dnet-includes=/opt/snortbuild/include
--with-dnet-libraries=/opt/snortbuild/lib
--with-libpcap-includes=/opt/snortbuild/include
--with-libpcap-libraries=/opt/snortbuild/lib

snort refuses to find libdnet.1 so you'll need to make a symlink to your lib path such as: sudo ln -s 
/opt/snortbuild/lib/libdnet.1.0.1
/lib/i386-linux-gnu/libdnet.1

vbox:/opt/snort/bin$ ldd snort
        linux-gate.so.1 =>  (0xb7759000)
        libdnet.1 => /lib/i386-linux-gnu/libdnet.1 (0xb772c000)
        libpcre.so.3 => /lib/i386-linux-gnu/libpcre.so.3 (0xb76ba000)
        libm.so.6 => /lib/i386-linux-gnu/libm.so.6 (0xb766c000)
        libcrypto.so.1.0.0 => /lib/i386-linux-gnu/libcrypto.so.1.0.0
(0xb7498000)
        libdl.so.2 => /lib/i386-linux-gnu/libdl.so.2 (0xb7493000)
        libsfbpf.so.0 => /opt/snortbuild/lib/libsfbpf.so.0 (0xb746b000)
        libpcap.so.1 => /opt/snortbuild/lib/libpcap.so.1 (0xb7425000)
        libz.so.1 => /lib/i386-linux-gnu/libz.so.1 (0xb7409000)
        libpthread.so.0 => /lib/i386-linux-gnu/libpthread.so.0 (0xb73ec000)
        libc.so.6 => /lib/i386-linux-gnu/libc.so.6 (0xb7231000)
        /lib/ld-linux.so.2 (0xb775a000)

vbox:/opt/snort/bin$ ./snort --version

    ,,_     -*> Snort! <*-
   o"  )~   Version 2.9.7.5 GRE (Build 262)
    ''''    By Martin Roesch & The Snort Team: 
http://www.snort.org/contact#team
            Copyright (C) 2014-2015 Cisco and/or its affiliates. All rights reserved.
            Copyright (C) 1998-2013 Sourcefire, Inc., et al.
            Using libpcap version 1.7.4
            Using PCRE version: 8.35 2014-04-04
            Using ZLIB version: 1.2.8

At this point if you want to push this out as a package you can tar.bz2 /opt/snortbuild and /opt/snort as well as the 
lib symlinks and away you go.  Hope that helps.

James

------------------------------------------------------------------------------
_______________________________________________
Snort-users mailing list
Snort-users () lists sourceforge net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/listinfo/snort-users
Snort-users list archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=snort-users

Please visit http://blog.snort.org to stay current on all the latest Snort news!
------------------------------------------------------------------------------
_______________________________________________
Snort-users mailing list
Snort-users () lists sourceforge net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/listinfo/snort-users
Snort-users list archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=snort-users

Please visit http://blog.snort.org to stay current on all the latest Snort news!
------------------------------------------------------------------------------
_______________________________________________
Snort-users mailing list
Snort-users () lists sourceforge net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/listinfo/snort-users
Snort-users list archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=snort-users

Please visit http://blog.snort.org to stay current on all the latest Snort news!
------------------------------------------------------------------------------
_______________________________________________
Snort-users mailing list
Snort-users () lists sourceforge net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/listinfo/snort-users
Snort-users list archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=snort-users

Please visit http://blog.snort.org to stay current on all the latest Snort news!
Previous By Date Next
Previous By Thread Next

Current thread: