Re: How to log an IP address in dpx.c ?

["Zeeuw, L.V. de" <l.v.de.zeeuw () hr nl>]

Hi Emiliano, 

I still trying to log the IP4 source en IP4 destination addresses in dotted decimal format. 

I was too fast in my opinion that everything worked fine using the code you provided previously. I hope you will help 
me once again (or anyone else) to figure out what is wrong. 

When I am adding this code to the dpx.c (from the dpx-1.6.tar.gz) just before the last } 


IP4Hdr iphd;
sfip_t iphdt;
iphdt = iphd.ip_src;
unsigned char* ipsrcp_test = (unsigned char*) &iphdt.ip;
unsigned int src_ip_test = (*ipsrcp_test << 24) + (*(ipsrcp_test+1) << 16) + \
(*(ipsrcp_test+2) << 8) + *(ipsrcp_test+3); unsigned short int src_port_test = \
p->src_port;

iphdt = iphd.ip_dst;
unsigned char* ipdstp_test = (unsigned char*) &iphdt.ip;
unsigned int dst_ip_test = (*ipdstp_test << 24) + (*(ipdstp_test+1) << 16) + \
(*(ipdstp_test+2) << 8) + *(ipdstp_test+3); unsigned short int dst_port_test = \
p->dst_port; _dpd.logMsg("\tTest: ipsrc%u portsrc%u ipdst%u \
portDst%u\n",src_ip_test,src_port_test, dst_ip_test,dst_port_test);
I can not find the correct IP address output (the port numbers are correct) when running ./test.sh (using test.pcap as 
input) 

Test: ipsrc16777216 portsrc12345 ipdst0         portDst8
Test: ipsrc16777216 portsrc8 ipdst0     portDst12345
Test: ipsrc16777216 portsrc12345 ipdst0         portDst80
Test: ipsrc16777216 portsrc12345 ipdst0         portDst8
Test: ipsrc16777216 portsrc8 ipdst0     portDst12345
Test: ipsrc16777216 portsrc12345 ipdst0         portDst80

The IPsrc should be 10.1.2.3 ...
The IPdst should be 10.4.5.6 ...

I can not figure out what is wrong. Any help is appreciated.

Regards,

Luc






> > > Zeeuw, L.V. de 07/25/14 9:19 AM >>>
Hi Emiliano,

thank you! I have tried this and indeed it works fine if I use 

   IP4Hdr iphd;
   sfip_t iphdt;

for the declaration.

These code snippets are very useful!

Regards,

Luc



> > > Emiliano Fausto <emiliano.fausto () gmail com> 07/24/14 6:49 PM >>>
Hello Luc,


I've tried this testing and it works fine:
iphdt = iphd.ip_src;
unsigned char* ipsrcp_test = (unsigned char*) &iphdt.ip;
unsigned int src_ip_test = (*ipsrcp_test << 24) + (*(ipsrcp_test+1) << 16) + (*(ipsrcp_test+2) << 8) + *(ipsrcp_test+3);
unsigned short int src_port_test = p->src_port;

iphdt = iphd.ip_dst;
unsigned char* ipdstp_test = (unsigned char*) &iphdt.ip;
unsigned int dst_ip_test = (*ipdstp_test << 24) + (*(ipdstp_test+1) << 16) + (*(ipdstp_test+2) << 8) + *(ipdstp_test+3);
unsigned short int dst_port_test = p->dst_port;
_dpd.logMsg("\tTest: ipsrc%u portsrc%u ipdst%u portDst%u\n",src_ip_test,src_port_test, dst_ip_test,dst_port_test);

Hope it helps,
 Emiliano.



2014-07-24 10:35 GMT-03:00 Zeeuw, L.V. de <l.v.de.zeeuw () hr nl>:
 Hi,

i am experimenting with the dpx. Its working. Now i started adding some statements to view the content ip4/tcp headers. 
I am able log things like src/dst, TCP payload size, etc. 
 
SFSnortPacket* p = (SFSnortPacket*)pkt;
_dpd.logMsg("Source port: %i, Destination port: %i\n",p->src_port, p->dst_port);
_dpd.logMsg("Payload size %i\n",p->payload_size);
 
but from sf_snort_packet.h and sf_ip.h  (??) i do not know how to log an ip-address ... 

I should like to ...

_dpd.logMsg("Source ip %?? \n", ?????);

BTW: Are there any recent books/tutorials for these kind of questions you would recommend? What about Snort development 
documentation for the most recent Snort version?
 
Any help is appreciated.

Regards,

Luc

the Netherlands


    



 
------------------------------------------------------------------------------
 Want fast and easy access to all the code in your enterprise? Index and
 search up to 200,000 lines of code with a free copy of Black Duck
 Code Sight - the same software that powers the world's largest code
 search on Ohloh, the Black Duck Open Hub! Try it now.
 http://p.sf.net/sfu/bds
_______________________________________________
 Snort-devel mailing list
 Snort-devel () lists sourceforge net
 https://lists.sourceforge.net/lists/listinfo/snort-devel
 Archive:
 http://sourceforge.net/mailarchive/forum.php?forum_name=snort-devel
 
 Please visit http://blog.snort.org for the latest news about Snort!



 

------------------------------------------------------------------------------
Want excitement?
Manually upgrade your production database.
When you want reliability, choose Perforce
Perforce version control. Predictably reliable.
http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk

_______________________________________________
Snort-devel mailing list
Snort-devel () lists sourceforge net
https://lists.sourceforge.net/lists/listinfo/snort-devel
Archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=snort-devel

Please visit http://blog.snort.org for the latest news about Snort!