Snort mailing list archives
Snort-2.9.6.0 stops sniffing without any warning
From: Xavier Van Pottelbergh <Xavier.VanPottelbergh () kuleuven be>
Date: Fri, 11 Apr 2014 13:48:00 +0000
Hi, I'm a student, setting up Snort as a project. I'm having this problem where snort is running fine for a while (a day, two days, a few hours ...) and then it just stops alerting. When I execute the command "service snort status" , it returns the message "snort is running...". The process is still there, but there are no further logs. I recompiled snort in debugging mode and found out that it is hanging in "FindPiiRecursively". I included my snort.conf file (without the commented lines), snort and operating system versions, and the relevant output of the gdb command. If you need more info, please ask me so that I can provide it. Snort version: ,,_ -*> Snort! <*- o" )~ Version 2.9.6.0 GRE (Build 47) '''' By Martin Roesch & The Snort Team: http://www.snort.org/snort/snort-team Copyright (C) 2014 Cisco and/or its affiliates. All rights reserved. Copyright (C) 1998-2013 Sourcefire, Inc., et al. Using libpcap version 1.5.3 Using PCRE version: 7.8 2008-09-05 Using ZLIB version: 1.2. I have compiled snort from source with the following options: ./configure -enable-sourcefire -enable-non-ether-decoders -enable-decoder-preprocessor-rules -enable-perfprofiling --enable-debug -enable-debug-msgs OS version: Red Hat Enterprise Linux Server release 6.5 (Santiago) Here are a few outputs I found when I executed the "gdb" command: ... 0x00007f896d1189ee in FindPiiRecursively (node=0x3b80090, buf=0x415b7a9 "D672-\367~\205-\326\304\333\322b/\201\230\212g\303:09\312ó\350W\243PT\334\341i\315\065fd\264\306\361K\234c\036PB\350\065\254\347\361\372\200\fv@:$\033\234W\031g\u02ae\b\347\004sOX\211+\t(\376\300\321\020q\031\235\221\313 \344\u0749s\275#;\\4\356\371\371\323\303\350`~\216\246\001\324/\277\244\373:\020\026K\366,\327\361\227\250C\350\206z\253\270\244\005\367{\257\245\213\247\355h7\235\262\240\227\301K\v\267\344\372(\263A\215\345\204\347u\353YM\232\257\353\355n\226\244W\222\025\230\204\037\313e\372\374\273\337#\200\u0675|c\n\211\236)\226\215\301}\371\364\370\361A*\227K"..., buf_index=0x7fff32ca30b6, buflen=5, config=0x2b6b160, partial_index=0x6e6e488, partial_node=0x6e6e480) at sdf_pattern_match.c:533 533 node_match = isdigit( (int)(*(buf + *buf_index)) ); Missing separate debuginfos, use: debuginfo-install glibc-2.12-1.132.el6.x86_64 openssl-1.0.1e-16.el6_5.4.x86_64 pcre-7.8-6.el6.x86_64 zlib-1.2.3-29.el6.x86_64 ... 0x00007f896d118b25 in FindPiiRecursively (node=0x3eec530, buf=0x415b7a9 "D672-\367~\205-\326\304\333\322b/\201\230\212g\303:09\312ó\350W\243PT\334\341i\315\065fd\264\306\361K\234c\036PB\350\065\254\347\361\372\200\fv@:$\033\234W\031g\u02ae\b\347\004sOX\211+\t(\376\300\321\020q\031\235\221\313 \344\u0749s\275#;\\4\356\371\371\323\303\350`~\216\246\001\324/\277\244\373:\020\026K\366,\327\361\227\250C\350\206z\253\270\244\005\367{\257\245\213\247\355h7\235\262\240\227\301K\v\267\344\372(\263A\215\345\204\347u\353YM\232\257\353\355n\226\244W\222\025\230\204\037\313e\372\374\273\337#\200\u0675|c\n\211\236)\226\215\301}\371\364\370\361A*\227K"..., buf_index=0x7fff32ca30b6, buflen=5, config=0x2b6b160, partial_index=0x6e6e488, partial_node=0x6e6e480) at sdf_pattern_match.c:562 562 node_match = (*(buf + *buf_index) == *(node->pattern + pattern_index)); Missing separate debuginfos, use: debuginfo-install glibc-2.12-1.132.el6.x86_64 openssl-1.0.1e-16.el6_5.4.x86_64 pcre-7.8-6.el6.x86_64 zlib-1.2.3-29.el6.x86_64 ... 0x00007f896d118b9d in FindPiiRecursively (node=0x3b80090, buf=0x415b7a9 "D672-\367~\205-\326\304\333\322b/\201\230\212g\303:09\312ó\350W\243PT\334\341i\315\065fd\264\306\361K\234c\036PB\350\065\254\347\361\372\200\fv@:$\033\234W\031g\u02ae\b\347\004sOX\211+\t(\376\300\321\020q\031\235\221\313 \344\u0749s\275#;\\4\356\371\371\323\303\350`~\216\246\001\324/\277\244\373:\020\026K\366,\327\361\227\250C\350\206z\253\270\244\005\367{\257\245\213\247\355h7\235\262\240\227\301K\v\267\344\372(\263A\215\345\204\347u\353YM\232\257\353\355n\226\244W\222\025\230\204\037\313e\372\374\273\337#\200\u0675|c\n\211\236)\226\215\301}\371\364\370\361A*\227K"..., buf_index=0x7fff32ca30b6, buflen=5, config=0x2b6b160, partial_index=0x6e6e488, partial_node=0x6e6e480) at sdf_pattern_match.c:579 579 (*buf_index)++; Missing separate debuginfos, use: debuginfo-install glibc-2.12-1.132.el6.x86_64 openssl-1.0.1e-16.el6_5.4.x86_64 pcre-7.8-6.el6.x86_64 zlib-1.2.3-29.e Snort.conf: ipvar HOME_NET any ipvar EXTERNAL_NET any ipvar DNS_SERVERS $HOME_NET ipvar SMTP_SERVERS $HOME_NET ipvar HTTP_SERVERS $HOME_NET ipvar SQL_SERVERS $HOME_NET ipvar TELNET_SERVERS $HOME_NET ipvar SSH_SERVERS $HOME_NET ipvar FTP_SERVERS $HOME_NET ipvar SIP_SERVERS $HOME_NET portvar HTTP_PORTS [36,80,81,82,83,84,85,86,87,88,89,90,311,383,555,591,593,631,801,808,818,901,972,1158,1220,1414,1533,1741,1830,2231,2301,2381,2809,3029,3037,3057,3128,3443,3702,4000,4343,4848,5117,5250,6080,6173,6988,7000,7001,7071,7144,7145,7510,7770,7777,7779,8000,8008,8014,8028,8080,8081,8082,8085,8088,8090,8118,8123,8180,8181,8222,8243,8280,8300,8500,8509,8800,8888,8899,9000,9060,9080,9090,9091,9111,9443,9999,10000,11371,12601,15489,29991,33300,34412,34443,34444,41080,44449,50000,50002,51423,53331,55252,55555,56712] portvar SHELLCODE_PORTS !80 portvar ORACLE_PORTS 1024: portvar SSH_PORTS 22 portvar FTP_PORTS [21,2100,3535] portvar SIP_PORTS [5060,5061,5600] portvar FILE_DATA_PORTS [$HTTP_PORTS,110,143] portvar GTP_PORTS [2123,2152,3386] ipvar AIM_SERVERS [64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,205.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9.0/24,205.188.153.0/24,205.188.179.0/24,205.188.248.0/24] var RULE_PATH /etc/snort/rules var SO_RULE_PATH /etc/snort/so_rules var PREPROC_RULE_PATH /ect/snort/preproc_rules ################################################### # Step #2: Configure the decoder. For more information, see README.decode config disable_decode_alerts config disable_tcpopt_experimental_alerts config disable_tcpopt_obsolete_alerts config disable_tcpopt_ttcp_alerts config disable_tcpopt_alerts config disable_ipopt_alerts config checksum_mode: all ################################################### # Step #3: Configure the base detection engine. For more information, see README.decode config pcre_match_limit: 3500 config pcre_match_limit_recursion: 1500 config detection: search-method ac-split search-optimize max-pattern-len 20 config event_queue: max_queue 8 log 3 order_events priority ################################################### # Configure Perf Profiling for debugging config profile_rules: print all, sort matches, filename /var/log/snort/profileRules.log append config profile_preprocs: print all, sort checks, filename /var/log/snort/profilePreProcs.log append ################################################### # Configure protocol aware flushing config paf_max: 32000 ################################################### # Step #4: Configure dynamic loaded libraries. dynamicpreprocessor directory /usr/local/lib/snort_dynamicpreprocessor/ dynamicengine /usr/local/lib/snort_dynamicengine/libsf_engine.so dynamicdetection directory /usr/local/lib/snort_dynamicrules ################################################### # Step #5: Configure preprocessors preprocessor frag3_global: max_frags 131072, memcap 8388608 preprocessor frag3_engine: policy windows detect_anomalies overlap_limit 10 min_fragment_length 100 timeout 180 preprocessor stream5_global: memcap 268435456, \ prune_log_max 67139536, \ track_tcp yes, \ track_udp yes, \ track_icmp no, \ max_tcp 262144, \ max_udp 131072, \ max_active_responses 2, \ min_response_seconds 5 preprocessor stream5_tcp: policy windows, detect_anomalies, require_3whs 180, \ max_queued_bytes 268435456, \ max_queued_segs 41936, \ overlap_limit 10, small_segments 3 bytes 150, timeout 180, \ ports client 21 22 23 25 42 53 70 79 109 110 111 113 119 135 136 137 139 143 \ 161 445 513 514 587 593 691 1433 1521 1741 2100 3306 6070 6665 6666 6667 6668 6669 \ 7000 8181 32770 32771 32772 32773 32774 32775 32776 32777 32778 32779, \ ports both 36 80 81 82 83 84 85 86 87 88 89 90 110 311 383 443 465 563 555 591 593 631 636 801 808 818 901 972 989 992 993 994 995 1158 1220 1414 1533 1741 1830 2231 2301 2381 2809 3029 3037 3057 3128 3443 3702 4000 4343 4848 5117 5250 6080 6173 6988 7907 7000 7001 7071 7144 7145 7510 7802 7770 7777 7779 \ 7801 7900 7901 7902 7903 7904 7905 7906 7908 7909 7910 7911 7912 7913 7914 7915 7916 \ 7917 7918 7919 7920 8000 8008 8014 8028 8080 8081 8082 8085 8088 8090 8118 8123 8180 8181 8222 8243 8280 8300 8500 8509 8800 8888 8899 9000 9060 9080 9090 9091 9111 9443 9999 10000 11371 12601 15489 29991 33300 34412 34443 34444 41080 44449 50000 50002 51423 53331 55252 55555 56712 preprocessor stream5_udp: timeout 180 preprocessor perfmonitor: time 600 events flow file /var/log/snort/stats.profile.log max console preprocessor http_inspect: global iis_unicode_map unicode.map 1252 compress_depth 65535 decompress_depth 65535 preprocessor http_inspect_server: server default \ http_methods { GET POST PUT SEARCH MKCOL COPY MOVE LOCK UNLOCK NOTIFY POLL BCOPY BDELETE BMOVE LINK UNLINK OPTIONS HEAD DELETE TRACE TRACK CONNECT SOURCE SUBSCRIBE UNSUBSCRIBE PROPFIND PROPPATCH BPROPFIND BPROPPATCH RPC_CONNECT PROXY_SUCCESS BITS_POST CCM_POST SMS_POST RPC_IN_DATA RPC_OUT_DATA RPC_ECHO_DATA } \ chunk_length 500000 \ server_flow_depth 0 \ client_flow_depth 0 \ post_depth 65495 \ oversize_dir_length 500 \ max_header_length 750 \ max_headers 100 \ max_spaces 200 \ small_chunk_length { 10 5 } \ ports { 36 80 81 82 83 84 85 86 87 88 89 90 311 383 555 591 593 631 801 808 818 901 972 1158 1220 1414 1741 1830 2231 2301 2381 2809 3029 3037 3057 3128 3443 3702 4000 4343 4848 5117 5250 6080 6173 6988 7000 7001 7071 7144 7145 7510 7770 7777 7779 8000 8008 8014 8028 8080 8081 8082 8085 8088 8090 8118 8123 8180 8181 8222 8243 8280 8300 8500 8509 8800 8888 8899 9000 9060 9080 9090 9091 9111 9443 9999 10000 11371 12601 15489 29991 33300 34412 34443 34444 41080 44449 50000 50002 51423 53331 55252 55555 56712 } \ non_rfc_char { 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 } \ enable_cookie \ extended_response_inspection \ inspect_gzip \ normalize_utf \ unlimited_decompress \ normalize_javascript \ apache_whitespace no \ ascii no \ bare_byte no \ directory no \ double_decode no \ iis_backslash no \ iis_delimiter no \ iis_unicode no \ multi_slash no \ utf_8 no \ u_encode yes \ webroot no preprocessor rpc_decode: 111 32770 32771 32772 32773 32774 32775 32776 32777 32778 32779 no_alert_multiple_requests no_alert_large_fragments no_alert_incomplete preprocessor bo preprocessor ftp_telnet: global inspection_type stateful encrypted_traffic no check_encrypted preprocessor ftp_telnet_protocol: telnet \ ayt_attack_thresh 20 \ normalize ports { 23 } \ detect_anomalies preprocessor ftp_telnet_protocol: ftp server default \ def_max_param_len 100 \ ports { 21 2100 3535 } \ telnet_cmds yes \ ignore_telnet_erase_cmds yes \ ftp_cmds { ABOR ACCT ADAT ALLO APPE AUTH CCC CDUP } \ ftp_cmds { CEL CLNT CMD CONF CWD DELE ENC EPRT } \ ftp_cmds { EPSV ESTA ESTP FEAT HELP LANG LIST LPRT } \ ftp_cmds { LPSV MACB MAIL MDTM MIC MKD MLSD MLST } \ ftp_cmds { MODE NLST NOOP OPTS PASS PASV PBSZ PORT } \ ftp_cmds { PROT PWD QUIT REIN REST RETR RMD RNFR } \ ftp_cmds { RNTO SDUP SITE SIZE SMNT STAT STOR STOU } \ ftp_cmds { STRU SYST TEST TYPE USER XCUP XCRC XCWD } \ ftp_cmds { XMAS XMD5 XMKD XPWD XRCP XRMD XRSQ XSEM } \ ftp_cmds { XSEN XSHA1 XSHA256 } \ alt_max_param_len 0 { ABOR CCC CDUP ESTA FEAT LPSV NOOP PASV PWD QUIT REIN STOU SYST XCUP XPWD } \ alt_max_param_len 200 { ALLO APPE CMD HELP NLST RETR RNFR STOR STOU XMKD } \ alt_max_param_len 256 { CWD RNTO } \ alt_max_param_len 400 { PORT } \ alt_max_param_len 512 { SIZE } \ chk_str_fmt { ACCT ADAT ALLO APPE AUTH CEL CLNT CMD } \ chk_str_fmt { CONF CWD DELE ENC EPRT EPSV ESTP HELP } \ chk_str_fmt { LANG LIST LPRT MACB MAIL MDTM MIC MKD } \ chk_str_fmt { MLSD MLST MODE NLST OPTS PASS PBSZ PORT } \ chk_str_fmt { PROT REST RETR RMD RNFR RNTO SDUP SITE } \ chk_str_fmt { SIZE SMNT STAT STOR STRU TEST TYPE USER } \ chk_str_fmt { XCRC XCWD XMAS XMD5 XMKD XRCP XRMD XRSQ } \ chk_str_fmt { XSEM XSEN XSHA1 XSHA256 } \ cmd_validity ALLO < int [ char R int ] > \ cmd_validity EPSV < [ { char 12 | char A char L char L } ] > \ cmd_validity MACB < string > \ cmd_validity MDTM < [ date nnnnnnnnnnnnnn[.n[n[n]]] ] string > \ cmd_validity MODE < char ASBCZ > \ cmd_validity PORT < host_port > \ cmd_validity PROT < char CSEP > \ cmd_validity STRU < char FRPO [ string ] > \ cmd_validity TYPE < { char AE [ char NTC ] | char I | char L [ number ] } > preprocessor ftp_telnet_protocol: ftp client default \ max_resp_len 256 \ bounce yes \ ignore_telnet_erase_cmds yes \ telnet_cmds yes preprocessor smtp: ports { 25 465 587 691 } \ inspection_type stateful \ b64_decode_depth 0 \ qp_decode_depth 0 \ bitenc_decode_depth 0 \ uu_decode_depth 0 \ log_mailfrom \ log_rcptto \ log_filename \ log_email_hdrs \ normalize cmds \ normalize_cmds { ATRN AUTH BDAT CHUNKING DATA DEBUG EHLO EMAL ESAM ESND ESOM ETRN EVFY } \ normalize_cmds { EXPN HELO HELP IDENT MAIL NOOP ONEX QUEU QUIT RCPT RSET SAML SEND SOML } \ normalize_cmds { STARTTLS TICK TIME TURN TURNME VERB VRFY X-ADAT X-DRCP X-ERCP X-EXCH50 } \ normalize_cmds { X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE XQUE XSTA XTRN XUSR } \ max_command_line_len 512 \ max_header_line_len 1000 \ max_response_line_len 512 \ alt_max_command_line_len 260 { MAIL } \ alt_max_command_line_len 300 { RCPT } \ alt_max_command_line_len 500 { HELP HELO ETRN EHLO } \ alt_max_command_line_len 255 { EXPN VRFY ATRN SIZE BDAT DEBUG EMAL ESAM ESND ESOM EVFY IDENT NOOP RSET } \ alt_max_command_line_len 246 { SEND SAML SOML AUTH TURN ETRN DATA RSET QUIT ONEX QUEU STARTTLS TICK TIME TURNME VERB X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE XQUE XSTA XTRN XUSR } \ valid_cmds { ATRN AUTH BDAT CHUNKING DATA DEBUG EHLO EMAL ESAM ESND ESOM ETRN EVFY } \ valid_cmds { EXPN HELO HELP IDENT MAIL NOOP ONEX QUEU QUIT RCPT RSET SAML SEND SOML } \ valid_cmds { STARTTLS TICK TIME TURN TURNME VERB VRFY X-ADAT X-DRCP X-ERCP X-EXCH50 } \ valid_cmds { X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE XQUE XSTA XTRN XUSR } \ xlink2state { enabled } preprocessor sfportscan: proto { all } memcap { 10000000 } sense_level { medium } preprocessor ssh: server_ports { 22 } \ autodetect \ max_client_bytes 19600 \ max_encrypted_packets 20 \ max_server_version_len 100 \ enable_respoverflow enable_ssh1crc32 \ enable_srvoverflow enable_protomismatch preprocessor dcerpc2: memcap 102400, events [co ] preprocessor dcerpc2_server: default, policy WinXP, \ detect [smb [139,445], tcp 135, udp 135, rpc-over-http-server 593], \ autodetect [tcp 1025:, udp 1025:, rpc-over-http-server 1025:], \ smb_max_chain 3, smb_invalid_shares ["C$", "D$", "ADMIN$"] preprocessor dns: ports { 53 } enable_rdata_overflow preprocessor ssl: ports { 443 465 563 636 989 992 993 994 995 7801 7802 7900 7901 7902 7903 7904 7905 7906 7907 7908 7909 7910 7911 7912 7913 7914 7915 7916 7917 7918 7919 7920 }, trustservers, noinspect_encrypted preprocessor sensitive_data: alert_threshold 25 preprocessor sip: max_sessions 40000, \ ports { 5060 5061 5600 }, \ methods { invite \ cancel \ ack \ bye \ register \ options \ refer \ subscribe \ update \ join \ info \ message \ notify \ benotify \ do \ qauth \ sprack \ publish \ service \ unsubscribe \ prack }, \ max_uri_len 512, \ max_call_id_len 80, \ max_requestName_len 20, \ max_from_len 256, \ max_to_len 256, \ max_via_len 1024, \ max_contact_len 512, \ max_content_len 2048 preprocessor imap: \ ports { 143 } \ b64_decode_depth 0 \ qp_decode_depth 0 \ bitenc_decode_depth 0 \ uu_decode_depth 0 preprocessor pop: \ ports { 110 } \ b64_decode_depth 0 \ qp_decode_depth 0 \ bitenc_decode_depth 0 \ uu_decode_depth 0 preprocessor modbus: ports { 502 } preprocessor dnp3: ports { 20000 } \ memcap 262144 \ check_crc ################################################### # Step #6: Configure output plugins output alert_syslog: LOG_LOCAL6 LOG_ALERT include classification.config include reference.config ################################################### # Step #7: Customize your rule set include $RULE_PATH/local.rules include $RULE_PATH/app-detect.rules include $RULE_PATH/attack-responses.rules include $RULE_PATH/backdoor.rules include $RULE_PATH/bad-traffic.rules include $RULE_PATH/blacklist.rules include $RULE_PATH/botnet-cnc.rules include $RULE_PATH/browser-chrome.rules include $RULE_PATH/browser-firefox.rules include $RULE_PATH/browser-ie.rules include $RULE_PATH/browser-other.rules include $RULE_PATH/browser-plugins.rules include $RULE_PATH/browser-webkit.rules include $RULE_PATH/chat.rules include $RULE_PATH/content-replace.rules include $RULE_PATH/ddos.rules include $RULE_PATH/dns.rules include $RULE_PATH/dos.rules include $RULE_PATH/experimental.rules include $RULE_PATH/exploit-kit.rules include $RULE_PATH/exploit.rules include $RULE_PATH/file-executable.rules include $RULE_PATH/file-flash.rules include $RULE_PATH/file-identify.rules include $RULE_PATH/file-image.rules include $RULE_PATH/file-java.rules include $RULE_PATH/file-multimedia.rules include $RULE_PATH/file-office.rules include $RULE_PATH/file-other.rules include $RULE_PATH/file-pdf.rules include $RULE_PATH/finger.rules include $RULE_PATH/ftp.rules include $RULE_PATH/icmp-info.rules include $RULE_PATH/icmp.rules include $RULE_PATH/imap.rules include $RULE_PATH/indicator-compromise.rules include $RULE_PATH/indicator-obfuscation.rules include $RULE_PATH/indicator-scan.rules include $RULE_PATH/indicator-shellcode.rules include $RULE_PATH/info.rules include $RULE_PATH/malware-backdoor.rules include $RULE_PATH/malware-cnc.rules include $RULE_PATH/malware-other.rules include $RULE_PATH/malware-tools.rules include $RULE_PATH/misc.rules include $RULE_PATH/multimedia.rules include $RULE_PATH/mysql.rules include $RULE_PATH/netbios.rules include $RULE_PATH/nntp.rules include $RULE_PATH/oracle.rules include $RULE_PATH/os-linux.rules include $RULE_PATH/os-mobile.rules include $RULE_PATH/os-other.rules include $RULE_PATH/os-solaris.rules include $RULE_PATH/os-windows.rules include $RULE_PATH/other-ids.rules include $RULE_PATH/p2p.rules include $RULE_PATH/phishing-spam.rules include $RULE_PATH/policy-multimedia.rules include $RULE_PATH/policy-other.rules include $RULE_PATH/policy.rules include $RULE_PATH/policy-social.rules include $RULE_PATH/policy-spam.rules include $RULE_PATH/pop2.rules include $RULE_PATH/pop3.rules include $RULE_PATH/protocol-dns.rules include $RULE_PATH/protocol-finger.rules include $RULE_PATH/protocol-ftp.rules include $RULE_PATH/protocol-icmp.rules include $RULE_PATH/protocol-imap.rules include $RULE_PATH/protocol-nntp.rules include $RULE_PATH/protocol-pop.rules include $RULE_PATH/protocol-rpc.rules include $RULE_PATH/protocol-scada.rules include $RULE_PATH/protocol-services.rules include $RULE_PATH/protocol-snmp.rules include $RULE_PATH/protocol-telnet.rules include $RULE_PATH/protocol-tftp.rules include $RULE_PATH/protocol-voip.rules include $RULE_PATH/pua-adware.rules include $RULE_PATH/pua-other.rules include $RULE_PATH/pua-p2p.rules include $RULE_PATH/pua-toolbars.rules include $RULE_PATH/rpc.rules include $RULE_PATH/rservices.rules include $RULE_PATH/scada.rules include $RULE_PATH/scan.rules include $RULE_PATH/server-apache.rules include $RULE_PATH/server-iis.rules include $RULE_PATH/server-mail.rules include $RULE_PATH/server-mssql.rules include $RULE_PATH/server-mysql.rules include $RULE_PATH/server-oracle.rules include $RULE_PATH/server-other.rules include $RULE_PATH/server-samba.rules include $RULE_PATH/server-webapp.rules include $RULE_PATH/shellcode.rules include $RULE_PATH/smtp.rules include $RULE_PATH/snmp.rules include $RULE_PATH/specific-threats.rules include $RULE_PATH/spyware-put.rules include $RULE_PATH/sql.rules include $RULE_PATH/telnet.rules include $RULE_PATH/tftp.rules include $RULE_PATH/virus.rules include $RULE_PATH/voip.rules include $RULE_PATH/web-activex.rules include $RULE_PATH/web-attacks.rules include $RULE_PATH/web-cgi.rules include $RULE_PATH/web-client.rules include $RULE_PATH/web-coldfusion.rules include $RULE_PATH/web-frontpage.rules include $RULE_PATH/web-iis.rules include $RULE_PATH/web-misc.rules include $RULE_PATH/web-php.rules include $RULE_PATH/x11.rules ################################################### # Step #8: Customize your preprocessor and decoder alerts # include $PREPROC_RULE_PATH/preprocessor.rules # include $PREPROC_RULE_PATH/decoder.rules # include $PREPROC_RULE_PATH/sensitive-data.rules ################################################### # Step #9: Customize your Shared Object Snort Rules # include $SO_RULE_PATH/bad-traffic.rules # include $SO_RULE_PATH/chat.rules # include $SO_RULE_PATH/dos.rules # include $SO_RULE_PATH/exploit.rules # include $SO_RULE_PATH/icmp.rules # include $SO_RULE_PATH/imap.rules # include $SO_RULE_PATH/misc.rules # include $SO_RULE_PATH/multimedia.rules # include $SO_RULE_PATH/netbios.rules # include $SO_RULE_PATH/nntp.rules # include $SO_RULE_PATH/p2p.rules # include $SO_RULE_PATH/smtp.rules # include $SO_RULE_PATH/snmp.rules # include $SO_RULE_PATH/specific-threats.rules # include $SO_RULE_PATH/web-activex.rules # include $SO_RULE_PATH/web-client.rules # include $SO_RULE_PATH/web-iis.rules # include $SO_RULE_PATH/web-misc.rules # Event thresholding or suppression commands. See threshold.conf include threshold.conf include $RULE_PATH/snort.rules include $RULE_PATH/so_rules.rules
------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees
_______________________________________________ Snort-devel mailing list Snort-devel () lists sourceforge net https://lists.sourceforge.net/lists/listinfo/snort-devel Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=snort-devel Please visit http://blog.snort.org for the latest news about Snort!
Current thread:
- Snort-2.9.6.0 stops sniffing without any warning Xavier Van Pottelbergh (Apr 11)