Re: PF_RING and DAQ compile (0.6.2, and 2.0.0)

[Avery Rozar <Avery.Rozar () i-techsupport com>]

Thank you for your answer Tim, I can only assume that you answered my
first question on the Meteflows group. I'm getting an error "FATAL ERROR:
Can't start DAQ (-1) - pfring_open(): unable to open device 'eth1'. Please
use -i <device>!" when I try to start snort using pfring. I thought maybe
is was due to the DAQ compile error. I moved snort off the VM, and on the
physical host, and disabled selinux. I still get the same error. Would it
be due to the default bnx2 driver, or pfring license issue? Any help is
greatly appreciated.


ethtool -i eth2
driver: bnx2
version: 2.2.3
firmware-version: bc 1.9.6
bus-info: 0000:0f:04.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no




 


On 6/26/13 5:56 PM, "Tim Covel" <tcovel () metaflows com> wrote:

> Those configuration options should no longer be necessary, they were
> used in a much older version of DAQ that was bundled with the pf_ring
> module.
>
> You can take them out or safely ignore the warning:
> "configure: WARNING: unrecognized options: --with-libpfring-includes,
> --with-libpfring-libraries"
>
> I'll see if we can pull them out of the instructions as well to avoid
> confusion in the future.
>
> -Tim
>
> On 06/26/2013 12:13 PM, Avery Rozar wrote:
> > Has anyone had any success compiling DAQ using this switch
> > --with-libpfring-includes, and --with-libpfring-libraries? Using the
> > meteflows site It says to use these switches, but they are unknown to
> > the DAQ
> > ./configure command. And they also do not show up using the ./configure
> > -h.
> > Any help here would be great. Thank you!
> >
> >
> > -------------------------------------------------------------------------
> > -----
> > This SF.net email is sponsored by Windows:
> >
> > Build for Windows Store.
> >
> > http://p.sf.net/sfu/windows-dev2dev
> > _______________________________________________
> > Snort-users mailing list
> > Snort-users () lists sourceforge net
> > Go to this URL to change user options or unsubscribe:
> > https://lists.sourceforge.net/lists/listinfo/snort-users
> > Snort-users list archive:
> > http://sourceforge.net/mailarchive/forum.php?forum_name=snort-users
> >
> > Please visit http://blog.snort.org to stay current on all the latest
> > Snort news!
>
>
> --------------------------------------------------------------------------
> ----
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Snort-users mailing list
> Snort-users () lists sourceforge net
> Go to this URL to change user options or unsubscribe:
> https://lists.sourceforge.net/lists/listinfo/snort-users
> Snort-users list archive:
> http://sourceforge.net/mailarchive/forum.php?forum_name=snort-users
>
> Please visit http://blog.snort.org to stay current on all the latest
> Snort news!


------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:

Build for Windows Store.

http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Snort-users mailing list
Snort-users () lists sourceforge net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/listinfo/snort-users
Snort-users list archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=snort-users

Please visit http://blog.snort.org to stay current on all the latest Snort news!