Penetration Testing mailing list archives

Re: Mapping wireless LANS from the wired side


From: "dcdave" <dcdave () att net>
Date: Tue, 21 Aug 2001 11:25:20 -0500

There is a wap-nmap available - not sure this is what you are looking for,
but
check fyodor's site, or I have a link to it at
http://securingwireless.intranets.com
(free resource page)
dcdave
----- Original Message -----
From: <Mike.Ruscher () CSE-CST GC CA>
To: <jshaw () insync net>
Cc: <pen-test () securityfocus com>; <woody () callisma com>
Sent: Monday, August 20, 2001 5:25 PM
Subject: RE: Mapping wireless LANS from the wired side


I have no doubt that the wired side is the best approach for mapping one's
own KNOWN wireless clients and APs. However, the question I originally
posed
concerns testing for active wireless devices on a network from the wired
side using wired LAN systems.

There is no guarantee that war-driving will find them all, especially when
they may roam and not always be up when sniffed by a wireless system. In
any
case, this is irrelevant to the requirement at hand.

What I am looking for I guess, is a "wmap" type of solution. (Fyodor?!)

It's like finding dial-up modems from the network side, not by
war-dialling
(or by war-driving in this instance). In this case it should be a lot
easier, since everything is TCP/IP still. A list of company device/MAC
associations is all that would be necessary is my guess and not just
company/MAC associations. Collecting them is not a great hardship I
suppose
though, by time-consuming and forever requiring support to be fresh and
complete.

mgr

-----Original Message-----
From: Joe Shaw [mailto:jshaw () insync net]
Sent: Monday, August 20, 2001 6:06 PM
To: Mike.Ruscher () CSE-CST GC CA
Cc: pen-test () securityfocus com; woody () callisma com
Subject: RE: Mapping wireless LANS from the wired side



On Mon, 20 Aug 2001 Mike.Ruscher () CSE-CST GC CA wrote:

Yes, MAC addresses by vendor will identify the device company, if one
can
assume they are valid and not spoofed. I do not see on the OUI site
where
the MAC addresses are associated with a company's particular device
family
though. This is essential for determining a wireless device from a wired
one. Do most companies give this info out, or must it be extrapolated
from
experience?

The best way to track down wireless gear is with your own wireless gear.
It's much easier than trying to find them using the wired LAN.  Trying to
find it any other way will just waste your time.

Regards,
--
Joseph W. Shaw II
Network Security Specialist/CCNA
Unemployed.  Will hack for food.  God Bless.
Apparently I'm overqualified but undereducated to be employed.

--------------------------------------------------------------------------
--
This list is provided by the SecurityFocus Security Intelligence Alert
(SIA)
Service. For more information on SecurityFocus' SIA service which
automatically alerts you to the latest security vulnerabilities please
see:
https://alerts.securityfocus.com/




----------------------------------------------------------------------------
This list is provided by the SecurityFocus Security Intelligence Alert (SIA)
Service. For more information on SecurityFocus' SIA service which
automatically alerts you to the latest security vulnerabilities please see:
https://alerts.securityfocus.com/


Current thread: