Nmap Development mailing list archives

snmp-ios-config script argument problem


From: Michael Hubbard <michael.hubbard999 () gmail com>
Date: Thu, 20 Apr 2017 19:56:22 -0700

I have a question about the snmp-ios-config script.

I have been using it for a couple years with great success but I ran it
today and it failed to pull the configuration.

I ran wireshark and noticed that even though I defined:
--script-args snmpcommunity=private
it passed public as the string.

I tried typing the script from scratch and going back to some notes I had
on using the script but I was unsuccessful. If I set the switch up with a
RW community of public it works.

I started up a virtual machine that had Nmap 6.47 installed and the script
worked perfectly.

i tried the script on Ubuntu and Windows 7.

Is there something I have to do in nmap 7.40 to pass the argument?

If not can you point me in the right direction to troubleshoot?

Thanks!

Here is my command line.

mhubbard@1S1K-SYS76:~$ sudo nmap -v -n -sU -p 161 --script snmp-ios-config
--script-args snmpcommunity=private 192.168.10.51

Starting Nmap 7.40 ( https://nmap.org ) at 2017-04-16 16:04 PDT
NSE: Loaded 1 scripts for scanning.
NSE: Script Pre-scanning.
Initiating NSE at 16:04
Completed NSE at 16:04, 0.00s elapsed
Initiating ARP Ping Scan at 16:04
Scanning 192.168.10.51 [1 port]
Completed ARP Ping Scan at 16:04, 0.03s elapsed (1 total hosts)
Initiating UDP Scan at 16:04
Scanning 192.168.10.51 [1 port]
Discovered open port 161/udp on 192.168.10.51
Completed UDP Scan at 16:04, 0.04s elapsed (1 total ports)
NSE: Script scanning 192.168.10.51.
Initiating NSE at 16:04
Completed NSE at 16:04, 5.00s elapsed
Nmap scan report for 192.168.10.51
Host is up (0.0036s latency).
PORT    STATE SERVICE
161/udp open  snmp
MAC Address: 64:00:F1:01:6F:C1 (Cisco Systems)

NSE: Script Post-scanning.
Initiating NSE at 16:04
Completed NSE at 16:04, 0.00s elapsed
Read data files from: /usr/local/bin/../share/nmap
Nmap done: 1 IP address (1 host up) scanned in 5.41 seconds
           Raw packets sent: 2 (116B) | Rcvd: 2 (158B)
mhubbard@1S1K-SYS76:~$

-- 

http://mwhubbard.blogspot.com

Twitter: @rikosintie

https://www.linkedin.com/in/mwhubbard

Minilock Public Key

22LXKQertj4op8vCjpWNmGJyaGPryp3BEFv8d2y4rTzG4Q
_______________________________________________
Sent through the dev mailing list
https://nmap.org/mailman/listinfo/dev
Archived at http://seclists.org/nmap-dev/

Current thread: