Nmap Development mailing list archives
problems running broadcast discovery scripts
From: "Mike ." <dmciscobgp () hotmail com>
Date: Tue, 19 Jan 2016 16:00:13 +0000
i have now ran at least 4 of these and i can not get ANY of them to work! the EIGRP the DNS discovery, the RIPng. i will show you in the packet trace/debug so you can see that not a single packet is being created. what am i doing wrong, if anything?????? Mike example using RIPng script: nmap --script broadcast-ripng-discover -d2 -packet-trace Starting Nmap 7.00 ( https://nmap.org ) at 2016-01-19 09:56 Central Standard Time Fetchfile found C:\Program Files\Nmap/nmap-services PORTS: Using top 1000 ports found open (TCP:1000, UDP:0, SCTP:0) Winpcap present, dynamic linked to: WinPcap version 4.1.3 (packet.dll version 4. 1.0.2980), based on libpcap version 1.0 branch 1_0_rel0b (20091008) NPF service is already running. Fetchfile found C:\Program Files\Nmap/nmap.xsl The max # of sockets we are using is: 0 --------------- Timing report --------------- hostgroups: min 1, max 100000 rtt-timeouts: init 1000, min 100, max 10000 max-scan-delay: TCP 1000, UDP 1000, SCTP 1000 parallelism: min 0, max 0 max-retries: 10, host-timeout: 0 min-rate: 0, max-rate: 0 --------------------------------------------- NSE: Using Lua 5.2. Fetchfile found C:\Program Files\Nmap/nse_main.lua Fetchfile found C:\Program Files\Nmap/nselib/lpeg-utility.lua Fetchfile found C:\Program Files\Nmap/nselib/stdnse.lua Fetchfile found C:\Program Files\Nmap/nselib/strict.lua Fetchfile found C:\Program Files\Nmap/scripts\script.db NSE: Arguments from CLI: Fetchfile found C:\Program Files\Nmap/scripts\broadcast-ripng-discover.nse NSE: Script broadcast-ripng-discover.nse was selected by name. Fetchfile found C:\Program Files\Nmap/nselib/ipOps.lua Fetchfile found C:\Program Files\Nmap/nselib/unittest.lua Fetchfile found C:\Program Files\Nmap/nselib/nsedebug.lua Fetchfile found C:\Program Files\Nmap/nselib/listop.lua Fetchfile found C:\Program Files\Nmap/nselib/tab.lua Fetchfile found C:\Program Files\Nmap/nselib/strbuf.lua NSE: Loaded 1 scripts for scanning. NSE: Loaded 'C:\Program Files\Nmap/scripts\broadcast-ripng-discover.nse'. NSE: Script Pre-scanning. NSE: Starting runlevel 1 (of 1) scan. Initiating NSE at 09:56 Completed NSE at 09:56, 0.00s elapsed NSE: Script Post-scanning. NSE: Starting runlevel 1 (of 1) scan. Initiating NSE at 09:56 Completed NSE at 09:56, 0.00s elapsed Read from C:\Program Files\Nmap: nmap-services. WARNING: No targets were specified, so 0 hosts scanned. Nmap done: 0 IP addresses (0 hosts up) scanned in 1.58 seconds Raw packets sent: 0 (0B) | Rcvd: 0 (0B)
_______________________________________________ Sent through the dev mailing list https://nmap.org/mailman/listinfo/dev Archived at http://seclists.org/nmap-dev/
Current thread:
- problems running broadcast discovery scripts Mike . (Jan 19)