Re: nmap nat-pmp-info script not working with Fritz!Box

[Gisle Vanem <gvanem () yahoo no>]

Arne Eickenberg wrote:

> Host is up (0.0031s latency).
> PORT     STATE SERVICE
> 5351/udp open  nat-pmp
> MAC Address: 34:xx:xx:xx:xx:xx (AVM GmbH)

Does it have to be NAT-PMP? SNMPv2 is more common amoong routers.
It works here by:
  nmap -sU -p snmp --script=snmp-interfaces 10.0.0.1 | grep 'IP address:'

gives me:
 IP address: 127.0.0.1  Netmask: 255.0.0.0
 IP address: xx.xx.xx.xx  Netmask: 255.255.255.0
 IP address: 169.254.255.1  Netmask: 255.255.0.0

I have a D-Link DIR-600 with dd-Wrt firmware (i.e. Linux).
It's bloody awesome!

> The command dns-sd -X does print the WAN IP, so imho the router can't be the problem. (?)

And 'dns-sd' is?

-- 
--gv
_______________________________________________
Sent through the dev mailing list
https://nmap.org/mailman/listinfo/dev
Archived at http://seclists.org/nmap-dev/