Re: nmap 5.21, OS X 10.6.2 - doesn't work as root

[David Fifield <david () bamsoftware com>]

On Mon, Mar 29, 2010 at 09:28:04AM -0400, Daniel wrote:
> ================
>
> [dt@localhost:~]$ nmap  -n -vvv -PN  10.0.1.7
>
> Starting Nmap 5.21 ( http://nmap.org ) at 2010-03-29 09:20 EDT
> Initiating Connect Scan at 09:20
> Scanning 10.0.1.7 [1000 ports]
> Discovered open port 135/tcp on 10.0.1.7
> Discovered open port 139/tcp on 10.0.1.7
> Discovered open port 445/tcp on 10.0.1.7
> Completed Connect Scan at 09:20, 1.14s elapsed (1000 total ports)
> Nmap scan report for 10.0.1.7
> Host is up (0.00057s latency).
> Scanned at 2010-03-29 09:20:17 EDT for 1s
> Not shown: 997 closed ports
> PORT    STATE SERVICE
> 135/tcp open  msrpc
> 139/tcp open  netbios-ssn
> 445/tcp open  microsoft-ds
>
> Read data files from: /usr/local/share/nmap
> Nmap done: 1 IP address (1 host up) scanned in 1.22 seconds
>
> ================
>
> but not as root:
>
> ================
>
> [dt@localhost:~]$ sudo nmap  -n -vvv -PN  10.0.1.7
>
> Starting Nmap 5.21 ( http://nmap.org ) at 2010-03-29 09:21 EDT
> Initiating ARP Ping Scan at 09:21
> Scanning 10.0.1.7 [1 port]
> Completed ARP Ping Scan at 09:21, 0.21s elapsed (1 total hosts)
> Nmap scan report for 10.0.1.7 [host down]
> Read data files from: /usr/local/share/nmap
> Nmap done: 1 IP address (0 hosts up) scanned in 0.29 seconds
>            Raw packets sent: 2 (84B) | Rcvd: 0 (0B)
>
> ================

Please send the output of the commands

sudo nmap --iflist
sudo netstat -rn

David Fifield
_______________________________________________
Sent through the nmap-dev mailing list
http://cgi.insecure.org/mailman/listinfo/nmap-dev
Archived at http://seclists.org/nmap-dev/