Re: Auto-configuring IPv6 transition mechanisms on customer devices

[JORDI PALET MARTINEZ via NANOG <nanog () nanog org>]

Hi Brandon,

This may help:
https://datatracker.ietf.org/doc/draft-ietf-v6ops-transition-ipv4aas/

It is in last call right now, I need to send a new version today/tomorrow, as the IESG review had some inputs, but 
nothing that change the document as you can read it now.

Regards,
Jordi
 
 

-----Mensaje original-----
De: NANOG <nanog-bounces () nanog org> en nombre de Brandon Martin <lists.nanog () monmotha net>
Fecha: viernes, 14 de diciembre de 2018, 17:20
Para: "nanog () nanog org" <nanog () nanog org>
Asunto: Auto-configuring IPv6 transition mechanisms on customer devices

    Are there any (draft, standard, or otherwise) defined mechanisms for 
    indicating to customer-provided devices that they should configure IPv6 
    to IPv4 transition mechanisms such as MAP, 4rd, 464XLAT, etc. and 
    providing the configuration details thereof?
    
    I'm not aware of any.  It seems like this is something that, if defined, 
    would make deployment of such mechanisms a lot easier even if SPs 
    provide the customer edge router that implements said mechanisms.  I 
    guess they'd probably be implemented as extensions to DHCPv6 or similar 
    or embedded in RAs (the latter seems ugly).
    -- 
    Brandon Martin
    



**********************************************
IPv4 is over
Are you ready for the new Internet ?
http://www.theipv6company.com
The IPv6 Company

This electronic message contains information which may be privileged or confidential. The information is intended to be 
for the exclusive use of the individual(s) named above and further non-explicilty authorized disclosure, copying, 
distribution or use of the contents of this information, even if partially, including attached files, is strictly 
prohibited and will be considered a criminal offense. If you are not the intended recipient be aware that any 
disclosure, copying, distribution or use of the contents of this information, even if partially, including attached 
files, is strictly prohibited, will be considered a criminal offense, so you must reply to the original sender to 
inform about this communication and delete it.