RE: 10G switch drops traffic for a split second

[Luke Guillory <lguillory () reservetele com>]

What model switch?
What's the config look like, all L2 or L3 as well?






Luke Guillory
Network Operations Manager

Tel:    985.536.1212
Fax:    985.536.0300
Email:  lguillory () reservetele com

Reserve Telecommunications
100 RTC Dr
Reserve, LA 70084

_________________________________________________________________________________________________

Disclaimer:
The information transmitted, including attachments, is intended only for the person(s) or entity to which it is 
addressed and may contain confidential and/or privileged material which should not disseminate, distribute or be 
copied. Please notify Luke Guillory immediately by e-mail if you have received this e-mail by mistake and delete this 
e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be 
intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Luke Guillory therefore does 
not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail 
transmission. .

-----Original Message-----
From: NANOG [mailto:nanog-bounces () nanog org] On Behalf Of TJ Trout
Sent: Tuesday, November 29, 2016 3:06 AM
To: nanog () nanog org
Subject: 10G switch drops traffic for a split second

I recently upgraded my core network from 1G to 10G and after the upgrade I have noticed that my 10G switch during peak 
traffic (1500mbps, 100,000pps) seems to be dropping traffic for a split second across all ports and all vlans. I 
immediately replaced the switch with a different brand/model and the problem persists.

Sometimes traffic drops to zero, others it drops to 50%, problem is very random but seems to occur with much more 
frequency during high PPS (pushing high traffic / iperf does not induce problem)

Could this be MTU? I've tried flow control, hard code duplex, stp on/off etc

I'm at a loss any ideas?

TJ Trout
Volt Broadband