Re: 10G-capable customer router recommendations?

[Michael Brown <michael () supermathie net>]

"‎2 NIC module slots supporting 1/10/40G/Fiber/Copper/Bypass"

Get one of those with a server class processor and and it's a server that looks like a spiffy network appliance. 
‎
‎Very general purpose if general purpose is what you need, quagga / openbgpd on ‎bsd, yes. And you can bake additional 
services onto it.

M.

  Original Message  
From: Ken Chase
Sent: Friday, April 15, 2016 20:26
To: NANOG
Subject: Re: 10G-capable customer router recommendations?

Does that lanner even do SFP+? Dont see it listed in the specs. Looks like 4210 has
2x SFP+, though their 'performance' level products look more in line with 'useful'.

http://www.lannerinc.com/products/x86-network-appliances/x86-rackmount-appliances/fw-8877

As for the microtics, wonky user interface, so very unciscolike (i guess thats
my problem - but the GUI thing feels like a toy), but for their midrange models I found
their bgp convergence times pretty poor on their low end cpus...

What do you put on the lanner? OpenBGPd? Quagga? Also looking for a 10G solution
here, low power (than a full ASR stack..) is my goal for 5-6 full bgp feeds.

/kc


On Fri, Apr 15, 2016 at 07:45:39PM -0400, Michael Brown said:
> Not *exactly* what you're asking for, but a Lanner appliance 
> (???http://www.lannerinc.com/products/network-appliances/x86-rackmount-network-appliances/nca-5210) might suit your 
> needs.
>
> M.
>
> ?? Original Message ??
> From: David Sotnick
> Sent: Friday, April 15, 2016 16:19
> To: NANOG
> Subject: 10G-capable customer router recommendations?
>
> Hello masters of the Internet,
>
> I was recently asked to set up networking at a VIP's home where he has
> Comcast "Gigabit Pro" service, which is delivered on a 10G-SR MM port on a
> Comcast-supplied Juniper ACX-2100 router.
>
> Which customer router would you suggest for such a setup? It needs to do
> IPv4 NAT, DHCP, IPv4+IPv6 routing and have a decent L4 firewall (that also
> supports IPv6).
>
> The customer pays for "2Gb" service (Comcast caps this at 2G+10% = 2.2Gbps)
> and would like to get what he pays for (*cough*) by having the ability to
> stream two 1Gbps streams (or at least achieve > 1.0Gbps).
>
> I'm tempted to get another ACX-2100 and do a 4x1Gb LACP port-channel to the
> customer switch, or replace the AV-integrator-installed Cisco SG300-52P
> (Cisco switch with e.g. an EX-3300 with 10Gb uplinks).
>
> Thanks in advance for your suggestions.
>
> -Dave

Ken Chase - math () sizone org