Re: 10G-capable customer router recommendations?

[Josh Reynolds <josh () kyneticwifi com>]

Can't do more than 1Gbps per flow. Not suitable for this application.
On Apr 15, 2016 5:03 PM, <mike.lyon () gmail com> wrote:

> Check out the Mikrotik Cloud Core routers, they make them with SFP+
> support now. I have one of them with 10g deployed right now.
>
> -Mike
>
> > On Apr 15, 2016, at 14:52, Aaron <aaron () wholesaleinternet net> wrote:
> >
> > Not a lot of 10G capable CPEs out there.  For our 10G residential
> customers we install Brocade ICXs.
> > Aaron
> >
> >
> > > On 4/15/2016 3:18 PM, David Sotnick wrote:
> > > Hello masters of the Internet,
> > >
> > > I was recently asked to set up networking at a VIP's home where he has
> > > Comcast "Gigabit Pro" service, which is delivered on a 10G-SR MM port
> on a
> > > Comcast-supplied Juniper ACX-2100 router.
> > >
> > > Which customer router would you suggest for such a setup? It needs to do
> > > IPv4 NAT, DHCP, IPv4+IPv6 routing and have a decent L4 firewall (that
> also
> > > supports IPv6).
> > >
> > > The customer pays for "2Gb" service (Comcast caps this at 2G+10% =
> 2.2Gbps)
> > > and would like to get what he pays for (*cough*) by having the ability
> to
> > > stream two 1Gbps streams (or at least achieve > 1.0Gbps).
> > >
> > > I'm tempted to get another ACX-2100 and do a 4x1Gb LACP port-channel to
> the
> > > customer switch, or replace the AV-integrator-installed Cisco SG300-52P
> > > (Cisco switch with e.g. an EX-3300 with 10Gb uplinks).
> > >
> > > Thanks in advance for your suggestions.
> > >
> > > -Dave
> >
> > --
> > ================================================================
> > Aaron Wendel
> > Chief Technical Officer
> > Wholesale Internet, Inc. (AS 32097)
> > (816)550-9030
> > http://www.wholesaleinternet.com
> > ================================================================