nanog mailing list archives

Re: Remember "Internet-In-A-Box"?


From: Owen DeLong <owen () delong com>
Date: Wed, 15 Jul 2015 23:51:37 -0700


On Jul 15, 2015, at 19:32 , Mark Andrews <marka () isc org> wrote:


In message <55A682E6.1050607 () matthew at>, Matthew Kaufman writes:
On 7/14/2015 11:22 PM, Mark Andrews wrote:

Yet I can take a Windows XP box.  Tell it to enable IPv6 and it
just works.  Everything that a node needed existed when Windows XP
was released.  The last 15 years has been waiting for ISP's and CPE
vendors to deliver IPv6 as a product.  This is not to say that every
vendor deployed all the parts of the protocol properly but they
existed.

This is only true for dual-stacked networks. I just tried to set up an 
IPv6-only WiFi network at my house recently, and it was a total fail due 
to non-implementation of relatively new standards... starting with the 
fact that my Juniper SRX doesn't run a load new enough to include RDNSS 
information in RAs, and some of the devices I wanted to test with 
(Android tablets) won't do DHCPv6.

You can blame the religious zealots that insisted that everything
DHCP does has to also be done via RA's.  This means that everyone
has to implement everything twice.  Something Google should have
realised when they releases Android.

Actually, no.

In this case, the problem isn’t the things RA does, but the things his
implementation of RA doesn’t do (RDNSS).

Without RDNSS, android would still be brain-damaged and unable
to figure out what an IPv6 nameserver is. The only way it would be
able to talk to the IPv6 internet was if it got nameservers from DHCP4.

At least with RDNSS, a thin lightweight client can get nameservers on IPv6.
At least with RDNSS, a network administrator that doesn’t want to have
to do DHCPv6 doesn’t have to in most cases.

The XP box is in an even worse situation if you try to run it on a 
v6-only network.

Which is fixable with a third party DHCPv6 client / manual configuration
of the nameservers.

Nope… XP’s resolver is utterly and completely incapable of transmitting
an IPv6 DNS request.

You _HAVE_ to have an IPv4 resolver reachable to the box or forego any
idea of using DNS.

Owen


Current thread: