Re: Usage Graphing per Subnet

[Methsri Wickramarathna <mmethw2003 () gmail com>]

Karsten , thanks for replying....
It's like this I don't want to take router info, only thing i want is to
graph the usage of my entire IP block per subnet wise.
Normaly we are using CACTI , MRTG , Observium etc... to gather router
information such as CPU , errors , usage etc...

All the systems mentioned above use SNMP to gather info and when it comes
to usage it only poll to a particular interface and plot the usage ......I
hope you had an idea about my requirement :)


On Tue, Feb 17, 2015 at 11:53 PM, Karsten Thomann <karsten_thomann () linfre de
> wrote:

> Hi,
>
> in this case I fully agree with Armin's advice, only wanted to provide a
> possible way to archive an easy result without activation of netflow/sflow
> which is possible if all subnets had dedicated ports somewhere in the net.
>
> I don't know what information you want to get from your routers, as there
> are
> many ways to get a result depending on the information you want and the
> used
> vendors.
>
> Regards
> Karsten
>
> Am Dienstag, 17. Februar 2015, 22:01:18 schrieb Methsri Wickramarathna:
> > Thanks Armin ,
> > I will try the SW you have mentioned seems like it's not easy to install
> > though :) :)
> >
> > Karsten,
> > I just bought out an example... my company has 2X18's and out of it we
> are
> > using considerable amount of /24s to access internet . Some subnets are
> > given without proper documentation , so it's very hard to do what you
> have
> > proposed.
> > What I can do is to install some kind of SW and gather info from my
> gateway
> > routers :( .....it's helpful if some one can guide me through this :) ...
> >
> > On Tue, Feb 17, 2015 at 5:34 PM, Karsten Thomann <
> karsten_thomann () linfre de>
> > wrote:
> > > Hi,
> > >
> > > I'm not sure how it is exactly build, but if every /29 uses it's own
> port
> > > a tool like cacti/graphite where you're aggregating all required ports
> > > within one graph is easier.
> > >
> > > Regards
> > > Karsten
> > >
> > > Am 17.02.2015 12:47, schrieb Armin Kneip:
> > >  Hi,
> > >
> > > > pmacct is your friend!
> > > >
> > > > http://www.pmacct.net/
> > > >
> > > >
> > > > Regards,
> > > > Armin
> > > >
> > > > Am 17.02.2015 um 12:35 schrieb Methsri Wickramarathna:
> > > > > Hi All, I have a requirement to plot a usage graph per subnet. As an
> > > > > example.
> > > > >
> > > > > I have a 192.168.1.0/24 subnet divided among 32 customers where
> each one
> > > > > will get a /29 [ 192.168.1.0/29 => Customer A ; 192.168.1.8/29 =>
> > > > > Customer
> > > > > B etc... ] ...
> > > > >
> > > > > Is there any tool to graph the usage of entire /24 subnet ???


-- 
-- 
________´$$$$`_____________________________,,,_
_______´$$$$$$$`_________________________´$$$`
________`$$$$$$$`______,,________,,_______´$$$$´
_________`$$$$$$$`____´$$`_____´$$`____´$$$$$´
__________`$$$$$$$`_´$$$$$`_´$$$$$`__´$$$$$$$´
___________`$$$$$$$_$$$$$$$_$$$$$$$_´$$$$$$$´_
____________`$$$$$$_$$$$$$$_$$$$$$$`´$$$$$$´_
___,,,,,,______`$$$$$$_$$$$$$$_$$$$$$$_$$$$$$´_
_´$$$$$`____`$$$$$$_$$$$$$$_$$$$$$$_$$$$$$´_
´$$$$$$$$$`´$$$$$$$_$$$$$$$_$$$$$$$_$$$$$´_
´$$$$$$$$$$$$$$$$$$_$$$$$$$_$$$$$$$_$$$$$´_
___`$$$$$$$$$$$$$$$_$$$$$$$_$$$$$$_$$$$$$´_
______`$$$$$$$$$$$$$_$$$$$__$$_$$$$$$_$$´_
_______`$$$$$$$$$$$$,___,$$$$,_____,$$$$$´_
_________`$$$$$$$$$$$$$$$$$$$$$$$$$$$$$´_
__________`$$$$$$$$$$$$$$$$$$$$$$$$$$$´_
____________`$$$$$$$$$$$$$$$$$$$$$$$$´_
_______________`$$$$$$$$$$$$$$$$$$$$´_

~~( ŊëŌ )~~