Re: Managing IOS Configuration Snippets

[Erik Muller <erikm () buh org>]

On 2/28/14, 10:24 , Leo Bicknell wrote:
> What I have always wanted is a way to group configuration, in particular by customer.  Ideally with the ability to see 
> it both as a unified view, and also as a per-customer view.
>
> For instance:
>
> customer AAAAA
>    interface GigabitEthernet1/2/3.10
>      description AAAAA
>      ip address 10.0.1.1 255.255.255.0
>    router bgp 1
>      neighbor 10.0.1.2 prefix-list AAAAA-in in
>    ip prefix-list AAAAA-in 10.1.0.0/24
> end
...

> Basically this follows the two modes in which engineers look at a device.  Most of the time is configuring a specific customer, and wanting to 
> be sure they are configured right; including the hard case of "no customer AAAAA", that is making sure all configuration for a 
> specific customer is removed.  The rest of the time is typically troubleshooting a network level problem where you want the device view we have 
> today, I see interface Gig1/2/3 is dropping packets, "show run" to see who's configure on it sort of operations.
>
> I don't know of any platform that has implemented this sort of config framework though.

It's not the cleanest, but in junos you can pretty much get this by 
defining a configuration group per customer and applying them all.  Your RE 
may hate you at commit time, but I've seen this approach work quite well.

-e