RE: telnet into a netgear switch?

[Jason Pope <boards188 () gmail com>]

------------------------------
Message: 2
Date: Sun, 24 Nov 2013 18:47:09 -0800
From: David Birdsong <david () imgix com>
To: nanog () nanog org
Subject: telnet into a netgear switch?
Message-ID:
        <CAOMvUQfeM_Wnc=eS1vz0Gh_pp-vZ+sPRk9Td-1U0A34c3A6jdQ () mail gmail com>
Content-Type: text/plain; charset=ISO-8859-1

Hey all, last night while at the datacenter I was in a pinch to extend a
rack's LAN. I compromised and ran out to the local Fry's to buy whatever
switch I could find so as to allow some configuration to happen while
we wait for the real network gear to show up.

I left before confirming I could access the switch remotely; it was very
late and I was pretty groggy and hey, any network gear has to be
telnet'table this day and age. Of course I was mostly wrong.

The switch expects some signed payload before allowing a telnet through. I
found this: https://code.google.com/p/netgear-telnetenable/...but I'm
having a hell of a time getting anything to respond.

The most confounding part is the switch doesn't respond to a single SYN
packet on low ports. I'm scanning all the ports now, but if nothing shows
up, I'm not sure what a payload is good for if the switch doesn't ACK a
single SYN.

I'm curious if anybody's got any tips besides not using Netgear in the
datacenter.

I have the MAC, I've IP'd it via DHCP, and the model number: JGS524E and I
can power cycle the switch as much as needed.


P.S. long time listener, first time caller. i'm more of a sysadmin
dangerously standing in for a proper network person.
------------------------------

Seems to me that you need to use their "Switch Configuration Utility" to
manage the switch.  I didn't read all the documentation, but that is what
jumps out at me after a brief look.  Maybe it will allow you to enable
telnet or ssh from there.  See the following link:

http://downloadcenter.netgear.com/en/product/JGS524E

Jason