RE: PDU recommendations

[shawn wilson <ag4ve.us () gmail com>]

Thanks, I think the amount of love for the APC stuff confirmed my
experience. I'll look at the Raritan PDUs as I like their KVMs but if I
have to use their software or a WebUI to manage it (I use AddleLink for
remote to the KVM because I don't like proprietary management) I won't use
their PDU.

AFAIK (I'll obviously confirm), the circuit is 208VAC and the plug is the
dual phase NMEA type.
On Jun 23, 2013 3:41 PM, "Petter Bruland" <Petter.Bruland () allegiantair com>
wrote:

> We're replacing TrippLite with APC. Had two TrippLite SNMP/Web cards stop
> working at random times, and need to be reset. Pain when the datacenter is
> far away. On a different note TrippLite support has been super awesome.
>
> The APC line we went with, model # escaping me at the moment, only had
> overall unit AMP load indicator. But their SNMP access is nice, for custom
> graphs in Cacti etc, and being able to remote bounce an outlet.
>
> We did have a few WTI, the really old ones, which did not store the config
> in flash, thus needed to be reconfigured via serial after power outage.
> Even with that annoyance, they had much faster response time from telnet
> (....I know, old) turning on/off outlets than either of APC or TrippLite.
>
> -Petter
>
> ________________________________________
> From: tritran () cox net [tritran () cox net]
> Sent: Sunday, June 23, 2013 12:05 PM
> To: shawn wilson; North American Network Operators Group
> Subject: Re: PDU recommendations
>
> APC is solid. Their newer line can provide outlet metering. WTI is also
> good...they support redundant circuits. I've seen Baytech died after just
> unplugging a server.
> ------Original Message------
> From: shawn wilson
> To: North American Network Operators Group
> Subject: PDU recommendations
> Sent: Jun 23, 2013 8:37 AM
>
> We currently use Triplite stuff but they've got an issue where after a few
> minutes, they stop accepting new tcp connections. We're adding a new 30A
> circuit and I'm thinking of going with APC (ran them in the past and never
> had any issues). However, I figured I'd see if there was a better brand /
> specific model recommendations for quality or bang / buck?
>
> Specs: 30A 24+ port 0U, managed (with ssh), lcd use display.