nanog mailing list archives

Re: OSPF and Forcing a Subnet


From: Shahab Vahabzadeh <sh.vahabzadeh () gmail com>
Date: Sun, 21 Jul 2013 09:35:48 +0430

Dear Randy,
Thanks for your help, but 172.16/16 belong to that region and for example
172.17/16 belong to another one and I want to ospf bring me the whole
subnet not which I used.
And summary-address does not to this for me.
Thanks


On Sun, Jul 21, 2013 at 1:21 AM, Randy <randy_94108 () yahoo com> wrote:

what you are seeing is the expected behavior.

you are asking the router to generate a type 3 summary for a type 1 lsa
that doesn't exist for area 10 via the "area 10 range' command" (also, that
is why it works when you add a /32 to loopback)

172.16/16 is an external route. If you want to generate a type 5 aggregate
use summary-addr as Jon has pointed out. Else, leave static in place,
redist static subnets but remove "area 10 range 172.16.0.0 255.255.0.0"
from ospf config.
./Randy




_______________________________
From: Shahab Vahabzadeh <sh.vahabzadeh () gmail com>
To: Jon Lewis <jlewis () lewis org>
Cc: nanog <nanog () nanog org>
Sent: Saturday, July 20, 2013 12:55 PM
Subject: Re: OSPF and Forcing a Subnet


Dear Jon I have a mistake in my last email, there is a static route like
this:

ip route 172.16.0.0 255.255.0.0 10.20.76.12

but again it is redistributing


On Sun, Jul 21, 2013 at 12:22 AM, Jon Lewis <jlewis () lewis org> wrote:

You don't have a route for 172.16/16 in the config below, so ospf will
not
advertise it.  You do have a route for a subnet of 172.16/16, so either
use
summary-address 172.16.0.0 255.255.0.0 or nail up a static route for
172.16.0.0 255.255.0.0 to null0 and redistribute static subnets, and
then
ospf can redistribute that static route.


On Sun, 21 Jul 2013, Shahab Vahabzadeh wrote:

 Dear Friends,
I have an OSPF over GRE configuration sending you below in which I have
problem.
I want to force OSPF to advertise 172.16/16 range without checking
anything.
And as you see I have an static route for it in routing table but again
OSPF do not advertise it, only it advertise when I put one /32 subnet
on
loopback interface.
even I put "redistribute static subnets" command with/without route-map
but
again do not work.
I think because of having my providers address range in my static
routes,
routers and ospf confused when wanna advertise routers.


interface Tunnel0

 ip address 128.140.40.2 255.255.255.252
 tunnel source 10.20.76.2
 tunnel destination 10.20.75.2
interface GigabitEthernet0/0
 description UPSTREAM - INTRANET
 ip address 10.20.76.2 255.255.255.248
interface GigabitEthernet0/1
 description CONNECTED ROUTER
 ip address 10.20.76.9 255.255.255.248

router ospf 10
 log-adjacency-changes
 area 10 range 172.16.0.0 255.255.0.0
 passive-interface default
 no passive-interface Tunnel0
 network 172.16.0.0 0.0.255.255 area 10
 network 128.140.40.0 0.0.0.3 area 0
ip route 0.0.0.0 0.0.0.0 10.20.76.1
ip route 172.16.0.0 255.255.224.0 10.20.76.12
ip route 10.20.76.0 255.255.255.0 10.20.76.12
ip route 10.20.77.0 255.255.255.0 10.20.76.12




Thanks

--
Regards,
Shahab Vahabzadeh, Network Engineer and System Administrator

Cell Phone: +1 (415) 871 0742
PGP Key Fingerprint = 8E34 B335 D702 0CA7 5A81  C2EE 76A2 46C2 5367
BF90



------------------------------**------------------------------**----------
 Jon Lewis, MCP :)           |  I route
                             |  therefore you are
_________ http://www.lewis.org/~jlewis/**pgp<
http://www.lewis.org/~jlewis/pgp>for PGP public key_________




--
Regards,
Shahab Vahabzadeh, Network Engineer and System Administrator

Cell Phone: +1 (415) 871 0742
PGP Key Fingerprint = 8E34 B335 D702 0CA7 5A81  C2EE 76A2 46C2 5367 BF90







-- 
Regards,
Shahab Vahabzadeh, Network Engineer and System Administrator

Cell Phone: +1 (415) 871 0742
PGP Key Fingerprint = 8E34 B335 D702 0CA7 5A81  C2EE 76A2 46C2 5367 BF90


Current thread: