Re: Muni fiber: L1 or L2?

[Fletcher Kittredge <fkittred () gwi net>]

On Thu, Jan 31, 2013 at 4:36 PM, Owen DeLong <owen () delong com> wrote:

> If you have an MMR where all of the customers come together, then you
> can cross-connect all of $PROVIDER_1's customers to a splitter provided
> by $PROVIDER_1 and cross connect all of $PROVIDER_2's customers to
> a splitter provided by $PROVIDER_2, etc.
>
> If the splitter is out in the neighborhood, then $PROVIDER_1 and
> $PROVIDER_2
> and... all need to build out to every neighborhood.
>
> If you have the splitter next to the PON gear instead of next to the
> subscribers,
> then you remove the relevance of the inability to connect a splitter to
> multiple
> OLTs. The splitter becomes the provider interface to the open fiber plant


Owen;

Interesting.   Do you then lose the cost advantage because you need home
run fiber back to the MMR?   Do you have examples of plants built with this
architecture (I know of one such plant, but I am hoping you will turn up
more examples.)

regards,
Fletcher
-- 
Fletcher Kittredge
GWI
8 Pomerleau Street
Biddeford, ME 04005-9457
207-602-1134