nanog mailing list archives

Re: For those who may use a projector in the NOC


From: "Michael Painter" <tvhawaii () shaka com>
Date: Fri, 18 Jan 2013 12:31:42 -1000

----- Original Message ----- 
  From: Eric Adler 
  To: Michael Painter 
  Cc: nanog () nanog org 
  Sent: Thursday, January 17, 2013 4:19 PM
  Subject: Re: For those who may use a projector in the NOC


  This appears to be an Epson / 3LCD marketing campaign.  

  snip

  - Eric Adler
  Broadcast Engineer

Hi Eric

In case you didn't see it at the avs forum:

"Obviously brightness is only one metric, but a useful one if there is any ambient light or if you're going after a 
large screen.

You might recognize my name.it's the one on the four page document highlighted above and available at 
www.colorlightoutput.com I'm a product manager for 3LCD.

I'm a little surprised by the comments suggesting we were trying to hide the identity of 3LCD behind the site. Clearly 
the site doesn't scream3LCD.it wasn't supposed to. The "Hero" of the site is Color Light Output. The purpose is to 
provide information about this new measurement methodology.not present the technical details of 3LCD. I thought the 
'feedback' page fairly well spells out who was behind it. That said, I will take these comments and make adjustment so 
that's it's clearer who is supporting the site.

Regarding the projectors selected for testing in table 2 of the document. It is true that all of these projectors are 
single chip models with color wheels. Why is that? As Scott points out above, an RGB 3-path projector will always have 
equal parts of WLO and CLO. I know already how an NEC LCD projectors is going to perform. Only single chip projectors 
were tested in order to better understand how each Color Wheel design impacted CLO. I do admit that the list is heavily 
leaning towards the biz/ed side of the projection market.that's due to the makeup of sales volumes; only about 10% of 
projectors are sold into home theater.

I hope, regardless of the company on my business card, that you'll agree with me that providing the customer this 
additional data is a good thing. My aim here is to get all manufacturers to list CLO as a supported metric."




Current thread: