Re: TCP Performance

[Blake Dunlap <ikiris () gmail com>]

This really sounds like you aren't testing the correct flow type in
i/jperf, or you have some QoS queues for http traffic but not the perf
traffic that are filled.

Regardless, your problem looks like either tail drops or packet loss, which
you showed originally. The task is to find out where this is occurring, and
which of the two it is. If you want to confirm what is going on, there are
some great bandwidth calculators on the internet which will show you what
bandwidth you can get with a given ms delay and % packet loss.

As far as flow control, its really outside the scope. If you ever need flow
control, there is usually a specific reason like FCoE, and if not, it's
generally better to just fix the backplane congestion issue if you can,
than ever worry about using FC. The problem with FC isn't node to node, its
when you have node to node to node with additional devices, it isn't smart
enough to discriminate, and can crater your network 3 devices over when it
would be much better to just lose a few packets.

-Blake


On Tue, Aug 27, 2013 at 9:49 AM, Nick Olsen <nick () flhsi com> wrote:

> Duplex mismatch has been checked across the board. On every device.
>
> Nick Olsen
> Network Operations (855) FLSPEED  x106
>
> ----------------------------------------
> From: "Chad Dailey" <nanog () thedaileyplanet com>
> Sent: Tuesday, August 27, 2013 10:48 AM
> To: nick () flhsi com
> Subject: Re: TCP Performance
>
> Check for duplex mismatch at the server.
>
> On Mon, Aug 26, 2013 at 2:07 PM, Nick Olsen <nick () flhsi com> wrote:
> Greetings all, I've got an issue I was hoping to put a few more eyes on.
>  Here's the scenario. Downloading a file at our Border is multiple orders
> of magnitude faster then a few hops out. Using the same 128MB test file, I
> tested at two different locations. As well as between them. Using multiple
> connections improves throughput, However it's the single stream issue
> we're
> looking at right now. All testing servers in question are Centos Linux.
>  Orlando Datapath: Cogent>Orlando Border Router (Mikrotik)>HP Procurve
> Switch> Server Results: 2013-08-29 05:04:09 (52.6 MB/s) - `128mbfile.tgz'
> saved [127926272/127926272]
>  Cocoa NOC Datapath: Cogent>Orlando Border Router (Mikrotik)>Licensed
> Microwave Link (300+Mb/s Capacity)>East Orange Router (Mikrotik)> Licensed
> Microwave Link (300+Mb/s Capacity)>Cocoa Router (Mikrotik)>Licensed
> Microwave Link (300+Mb/s Capacity)>Colo Router (Mikrotik)>NOC Router
> (Mikrotik)>HP Procurve Switch>Server Results: 2013-08-26 13:42:25 (398
> KB/s) - `128mbfile.tgz' saved [127926272/127926272]
>  Orlando-Cocoa NOC Datapath: Orlando Server>HP Procurve Switch>Orlando
> Border Router (Mikrotik)>Licensed Microwave Link (300+Mb/s Capacity)>East
> Orange Router (Mikrotik)> Licensed Microwave Link (300+Mb/s
> Capacity)>Cocoa
> Router (Mikrotik)>Licensed Microwave Link (300+Mb/s Capacity)>Colo Router
> (Mikrotik)>NOC Router(Mikrotik)>HP Procurve Switch>ServerResults:
> 2013-08-26 13:56:25 (3.31 MB/s) - `128mbfile.tgz' saved
> [134217728/134217728]
>  Now, For the fun of it. I ran Iperf single TCP between our Cocoa and
> Orlando POP's. Just like the HTTP test above. (Server has a 100Mb/s port).
> It maxes out the port, Unlike the HTTP test.
>  [root@ded01 ~]# iperf -c
> 208.90.219.18
> ------------------------------------------------------------Cli
>
> ent connecting to 208.90.219.18, TCP port 5001TCP window size: 16.0 KByte
> (default)------------------------------------------------------------[  3]
> local 206.208.56.130 port 47281 connected with 208.90.219.18 port 5001[
> ID]
> Interval       Transfer     Bandwidth[  3]  0.0-10.0 sec   114 MBytes
> 95.7
> Mbits/sec
>
> Here's associated packet captures for each transfer. As well as full wget
> output and traceroutes for each test. As you can see, The tests crossing
> the wireless links show about 3x more TCP re-transmits/dup ACK's. But I'm
> not sure I'm sold this could show such a huge drop in throughput. Other
> then that, nothing really stands out to me as to why these transfers are
> so
> much slower. Intra-network iperf testing shows full throughput the whole
> way with single connection. As well as UDP testing. One thing to note is
> the Iperf testing has far less TCP re-transmit/dup acks then any of the
> HTTP testing, Crossing the same Microwave Links and routers.
> http://cdn.141networks.com/files/captures.zip
> I appreciate any insight anyone might have. Thanks!
>  Nick Olsen
> Network Operations (855) FLSPEED  x106