RE: Colo Vending Machine

["Erik Soosalu" <erik.soosalu () calyxinc com>]

I know I'm being a freaking idealist.

My tool bag carries all my required sets of screws and cage nuts.  Works
great until the first level guy decides to borrow something and not put
it back.

Thanks,
Erik 
-----Original Message-----
From: Sven Olaf Kamphuis [mailto:sven () cb3rob net] 
Sent: Friday, February 17, 2012 2:02 PM
To: Erik Soosalu
Cc: NANOG
Subject: RE: Colo Vending Machine


On Fri, 17 Feb 2012, Erik Soosalu wrote:

> 1) Patch cables every 1' length from 3-10'
> 2) Velcro wrap
> 3) Tools (screwdrivers, etc)
>
> And since the racks usually come with the cage nuts, maybe the colo
should just provide them.

they do? nonono, you have to buy those seperately :P

racks don't even come with "doors" and "side walls" etc by default
*grin*

you have to buy them seperately anyway if you want to make sure your 
company uses all the same ones, so you don't have to take them out again

and replace them because some fukkin idiot put the wrong size into the 
hole as it "came with something else"

> >
> Thanks,
> Erik
>
> -----Original Message-----
> From: Jay Ashworth [mailto:jra () baylink com]
> Sent: Friday, February 17, 2012 1:35 PM
> To: NANOG
> Subject: WW: Colo Vending Machine
>
> Please post your top 3 favorite components/parts you'd like to see in
a
> vending machine at your colo; please be as specific as possible; don't
> let vendor specificity scare you off.
>
> Cheers,
> -- jra
> -- 
> Jay R. Ashworth                  Baylink
jra () baylink com
> Designer                     The Things I Think
RFC 2100
> Ashworth & Associates     http://baylink.pitas.com         2000 Land
Rover DII
> St Petersburg FL USA      http://photo.imageinc.us             +1 727
647 1274
>