nanog mailing list archives

Re: WW: Colo Vending Machine


From: Sven Olaf Kamphuis <sven () cb3rob net>
Date: Fri, 17 Feb 2012 18:56:27 +0000 (UTC)

rj45 crimp connectors for both 8p8c flatcable and cat5e (they are different!)

"cisco" type db9-rj45 adapters, prewired (when you buy them bulk they usually come unwired ;)

tierips

empty cds/dvds

usb cd/dvd writers (see rs232 ;)

usb floppy drives (yes, they're still around ;)

3.5" HD floppies (yes, they're still around ;)

usb -> rs232 adapters (in case the shitty modern laptop you just bought upon arriving in that country didn't come with the most important interface of all ;)

ECC RAM DIMMS of various sizes and speeds and pinnings

SCA and SAS and SATA HDDs and SSD's

CF cards, USB sticks, DIGITAL CAMERAS!

replacement ventilators for most equipment maybe.. but that one can be a bit tricky ;)

so pretty much all the stuff you normally cannot buy in computer stores and still need if you just go to location x and need to set things up without preparation.


--
Greetings,

Sven Olaf Kamphuis,
CB3ROB Ltd. & Co. KG
=========================================================================
Address: Koloniestrasse 34         VAT Tax ID:      DE267268209
         D-13359                   Registration:    HRA 42834 B
         BERLIN                    Phone:           +31/(0)87-8747479
         Germany                   GSM:             +49/(0)152-26410799
RIPE:    CBSK1-RIPE                e-Mail:          sven () cb3rob net
=========================================================================
<penpen> C3P0, der elektrische Westerwelle
http://www.facebook.com/cb3rob
=========================================================================

Confidential: Please be advised that the information contained in this
email message, including all attached documents or files, is privileged
and confidential and is intended only for the use of the individual or
individuals addressed. Any other use, dissemination, distribution or
copying of this communication is strictly prohibited.


On Fri, 17 Feb 2012, Sven Olaf Kamphuis wrote:

rackmount screws, nuts, bolts, rubber rings for both M6 and whatever other stuff ppl use (that smaller size is common too ;)

preferably in both black and silver color.

19" trays
19" electricity socket bars

IEC power cables.
ethernet patch cables 3 meter

screwdriver sets

and whatever other stuff people generally forget and then decide to steal out of our racks so we have to drive to the home depot kinda thing again.
(don't ask ;)

--
Greetings,

Sven Olaf Kamphuis,
CB3ROB Ltd. & Co. KG
=========================================================================
Address: Koloniestrasse 34         VAT Tax ID:      DE267268209
        D-13359                   Registration:    HRA 42834 B
        BERLIN                    Phone:           +31/(0)87-8747479
        Germany                   GSM:             +49/(0)152-26410799
RIPE:    CBSK1-RIPE                e-Mail:          sven () cb3rob net
=========================================================================
<penpen> C3P0, der elektrische Westerwelle
http://www.facebook.com/cb3rob
=========================================================================

Confidential: Please be advised that the information contained in this
email message, including all attached documents or files, is privileged
and confidential and is intended only for the use of the individual or
individuals addressed. Any other use, dissemination, distribution or
copying of this communication is strictly prohibited.


On Fri, 17 Feb 2012, Jay Ashworth wrote:

Please post your top 3 favorite components/parts you'd like to see in a
vending machine at your colo; please be as specific as possible; don't
let vendor specificity scare you off.

Cheers,
-- jra
--
Jay R. Ashworth Baylink jra () baylink com Designer The Things I Think RFC 2100 Ashworth & Associates http://baylink.pitas.com 2000 Land Rover DII St Petersburg FL USA http://photo.imageinc.us +1 727 647 1274




Current thread: