nanog mailing list archives
RE: Server Cabinet
From: "Leigh Porter" <leigh.porter () ukbroadband com>
Date: Wed, 4 May 2011 09:53:25 +0100
This may be a silly question but.. How did it get in there? -- Leigh Porter -----Original Message----- From: Robert Lusby [mailto:nanogwp () gmail com] Sent: Wed 5/4/2011 9:43 AM To: nanog () nanog org Subject: OT: Server Cabinet Sorry to start the day OT, but I'm sure you lovely lot will have some tips/experience! ;) We have a HP Server Cabinet (42U 10842 G2), that we've stripped down to the bare-bones chassis. It now measures 750mm wide. We have a door-way that said server cabinet must fit through, measuring up at 620mm. The cabinet chassis is welded at all four corners, so can't be taken apart any more without being cut. Can you see where this is leading yet? Three obvious questions: 1) Have you ever had to fit a cabinet through a doorway that's too small? 2) How did you do it? Cut cabinet, demolish wall ...? 3) If you cut the cabinet, any tips? Thanks. Rob ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
Current thread:
- OT: Server Cabinet Robert Lusby (May 04)
- RE: Server Cabinet Leigh Porter (May 04)
- Re: Server Cabinet James Aldridge (May 04)
- Re: Server Cabinet Bill Woodcock (May 04)
- Re: Server Cabinet TR Shaw (May 04)
- RE: Server Cabinet Barry Shein (May 04)
- Re: Server Cabinet D'Arcy J.M. Cain (May 04)
- RE: Server Cabinet Alex Rubenstein (May 04)
- Re: Server Cabinet Ken Chase (May 04)
- Re: Server Cabinet James Aldridge (May 04)
- RE: Server Cabinet Leigh Porter (May 04)
- Re: OT: Server Cabinet Robert Lusby (May 04)
- Re: OT: Server Cabinet Roland Perry (May 04)