nanog mailing list archives

Re: Network Equipment Discussion (HP and L2/10G)


From: Joel Jaeggli <joelja () bogus com>
Date: Fri, 13 May 2011 08:55:38 -0700

On 5/13/11 8:14 AM, Deepak Jain wrote:

Go figure, an actual thread about networking equipment on NANOG. :)

So reading Cisco's announcement, I go look at HP's higher end
switching/routing line and I see some pretty beefy looking gear.
A12500 and others. Does anyone have any experience with this thing --
is it white labeled from someone else?

3com aquisition/ Huawei joint venture

I took a look at the h3c s58xx sometime last year, I can report that
it's an ethernet siwtch.

Second question -- Does anyone know of a Cascade-style box (old days)
for 10G aggregation? What I mean is I need about a number of ports of
10G (pluggable *colored* optics) with just normal L2 stuff
(VLANs/dot1q) and I'd like to LACP/Port-channel that back to a pair
of 10G ports on a router. The wrinkle here is that I can't use a
normal enterprise 10G switch because of the need for DWDM optics
(ideally 80km style). For this application, buffers and such are not
an issue. Any suggestions?

Thanks in advance,

DJ




Current thread: