Re: P2P link over STM-1

[Carlos Martinez-Cagnazzo <carlosm3011 () gmail com>]

As said above, STM-1s are by their very nature point to point links.

You just need an STM-1 interface on your side and another on the customer
side. Which one will depend on the router models you will be using. Also, as
said above, you will need to engage the help of your local Cisco partner for
this.

> From your side (I mean the service provider side) you can also have a
channelized STM-4 or STM-16 and use one STM-1 channel for this. This would
be a good idea if you plan to have more than one customer of this nature.
Beware that these interfaces can be quite expensive.

Hope this helps,

Carlos

On Thu, Oct 7, 2010 at 4:24 AM, Peter Rudasingwa <
peter.rudasingwa () altechstream rw> wrote:

> I have clients who want a P2P link over STM-1.
>
> How can I achieve this? What kind of equipment do I need.
>
> At the moment I have a cisco 6500 and 7200VXR
>
> Thanks,
>
> Peter R.



-- 
--
=========================
Carlos M. Martinez-Cagnazzo
http://cagnazzo.name
=========================