RE: GRE Tunnels and MPLS

["Rettke, Brian" <Brian.Rettke () cableone biz>]

It's never been an MPLSoGRE Tunnel.

GRE Tunnel is doing EIGRP to advertise nonroutable networks to get to our provisioning system. This is IP based. On the 
network, it reaches the tunnel on the Co-lo router and the GRE header is removed. On egress, to return to a system, 
this interface is an MPLS interface.

I was not in the office, but the lead tech discovered that we were losing half of our web traffic. We turned off WCCP 
with no change. When he removed the MPLS IP command from the Co-location router, traffic returned to normal.

The odd part is, the traffic was not traffic that goes through the GRE tunnel. This was the public internet-bound 
traffic.

Sincerely,

Brian A . Rettke
RHCT, CCDP, CCNP, CCIP
Network Engineer, CableONE Internet Services

-----Original Message-----
From: Shimol Shah [mailto:shimshah () cisco com]
Sent: Wednesday, November 10, 2010 3:03 PM
To: Rettke, Brian
Cc: nanog () nanog org
Subject: Re: GRE Tunnels and MPLS

What exact commands did you add to get the MPLSoGRE working ? If you
remove them do the web traffic issues stop ? Is the traffic narrowed to
being dropped by the 7600 ?

Shimol

On 11/9/10 8:04 PM, Rettke, Brian wrote:
> It appears that about half of our web traffic is now being dropped, so problems continue. I'll have to double check 
> MTU and TCP adjust-mss settings, but other than that I have no idea. I've heard that there are some issues with MPLS 
> using some of the 67xx linecards, and apparently this is going to be a huge problem for us.
> ________________________________________
> From: Shimol Shah [shimshah () cisco com]
> Sent: Monday, November 08, 2010 1:19 PM
> To: nanog () nanog org
> Subject: Re: GRE Tunnels and MPLS
>
> Good deal. Sounds like a plan.
>
> Shimol
>
> On 11/8/10 2:00 PM, Rettke, Brian wrote:
> > This seems to be working now with the 'mls mpls tunnel-recir' command entered. There are some potential downsides, 
> > but this should get things up and running until I create the new backup tunnels (GRE over IPSec) on a connected 
> > router that is not MPLS-enabled. Thanks!
> >
> > Sincerely,
> >
> > Brian A . Rettke
> > RHCT, CCDP, CCNP, CCIP
> > Network Engineer, CableONE Internet Services
> >
> >
> > ------------------------------
> >
> > Message: 6
> > Date: Thu, 04 Nov 2010 16:49:55 -0400
> > From: Shimol Shah<shimshah () cisco com>
> > Subject: Re: GRE Tunnels and MPLS
> > To: nanog () nanog org
> > Message-ID:<4CD31C73.80004 () cisco com>
> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> >
> > Do you have recir enabled ? If not, good one to enable and check for
> > status of issue.
> >
> > http://www.cisco.com/en/US/docs/ios/mpls/command/reference/mp_m1.html#wp1012208
> >
> > "If you do not enable tunnel-MPLS recirculation, the IPv4 and
> > IPv4-tunneled packets that need to be labeled (for example, the packets
> > that are encapsulated with an MPLS header) will be corrupted when they
> > are transmitted from the Cisco 7600 series router."
> >
> > Shimol
> >
> > On 11/4/10 4:00 PM, Rettke, Brian wrote:
> > > Beginning work on our implementation of MPLS for the backbone network. I've run into difficulty with our GRE 
> > > tunnels. The GRE Tunnel sits on our co-lo router (a Cisco 7600), and it uses a route-map to push our 10.x modem 
> > > traffic to our DHCP servers. This is because the backbone is not complete and DHCP traffic needs to traverse the 
> > > internet. What I have found is that when I enable basic MPLS on the co-location interfaces that head back to the 
> > > individual systems, DHCP traffic still works, but ICMP and other 10.x traffic dies. There is also an intermittent 
> > > problem with DHCP when it is enabled, where not all DISCOVERS are answered. I've tried everything I can think of, 
> > > including adjusting MTU and TCP MSS. It only seems to impact when the co-location router has a GRE tunnel on one 
> > > buffer, which it terminates, and then it has to encapsulate traffic with an MPLS tag before sending out of the 
> > > other buffer. Theoretically, it should work, but I can't figure out if there is some pr
o
> b
> > lem with MPLS' interaction with the tunnel. Has anyone encountered something similar?
> > > Sincerely,
> > >
> > > Brian A . Rettke
> > > RHCT, CCDP, CCNP, CCIP
> > > Network Engineer, CableONE Internet Services