RE: <NAT translation from a sourced network to a destination network>

["Mike Ruiz" <mruiz () lstfinancial com>]

Also this 192.168.1.0/24 needs to have access to my other prefixes.  It only needs to NAT'd when it needs to connect to 
that specific network.

 

From: Andrey Khomyakov [mailto:khomyakov.andrey () gmail com] 
Sent: Friday, June 18, 2010 3:25 PM
To: Mike Ruiz
Cc: nanog () nanog org
Subject: Re: <NAT translation from a sourced network to a destination network>

 

Do you mean you want certain addresses on /24 to NAT out to /27, but not all of them? Sounds like and ACL will do:

http://articles.techrepublic.com.com/5100-10878_11-1039094.html


-ak

On Fri, Jun 18, 2010 at 4:13 PM, Mike Ruiz <mruiz () lstfinancial com> wrote:

Ok here we go.  I know the subject is a little ambiguous, please allow to explain.



I have a network of 192.168.1.0/24 and I need it to reach a network 10.0.1.0/27 only when it needs to be accessed by 
specific machines that reside on the 192.168.1.0/24 network.





192.168.1.10 à NAT à10.0.1.10 à route that packet to 10.0.1.1.



I only want specific host to route to that specific /27 network .



Any help would be appreciated. So far what I have gathered is only for VPN connections but I do not want to build a 
VPN.  Thank you again in advance.





Michael Ruiz

Network Engineer



"If you tell people where to go, but not how to get there, you'll be amazed at the results." -- General George S. 
Patton Jr.









-- 
Andrey Khomyakov
[khomyakov.andrey () gmail com]