Re: L2 - L3 Etherchannel

[Amolak <amolak.singh () gmail com>]

Thanks guys.

-Amolak

On Thu, Apr 9, 2009 at 1:47 AM, Arie Vayner <arievayner () gmail com> wrote:

> Yes.
>
>
> On Wed, Apr 8, 2009 at 9:03 PM, Amolak <amolak.singh () gmail com> wrote:
>
> > Hi All,
> >
> > Is it possible to create L2 Etherchannel at one end and L3 etherchannel at
> > another end?
> >
> > For Example:
> >
> > SW-1
> > ====
> >
> > interface GigabitEthernet1/1
> >  channel-group 1 mode desirable
> >  channel-protocol pagp
> > !
> > interface GigabitEthernet1/2
> >  channel-group 1 mode desirable
> >  channel-protocol pagp
> > !
> > interface Port-channel 1
> >  no ip address
> >  switchport
> >  switchport access vlan 10
> >  switchport mode access
> > !
> > int vlan10
> >  ip address 1.1.1.1 255.255.255.252
> > !
> > ------------------------------------
> >
> > SW-2
> > ====
> >
> > interface Port-channel 2
> >  ip address 1.1.1.2 255.255.255.252
> > !
> > interface GigabitEthernet1/1
> >  no ip address
> >  channel-group 2 mode desirable
> >  channel-protocol pagp
> > !
> > interface GigabitEthernet1/2
> >  no ip address
> >  channel-group 2 mode desirable
> >  channel-protocol pagp
> > !
> >
> > I don't have a lab to test it, can somebody confirm if the connectivity
> > will
> > work between these devices as per this setup.
> >
> > Thanks,
> > Amolak