nanog mailing list archives
Re: Load Balancing Multiple DS3s (outgoing) on a 7500
From: "Richard J. Sears" <rsears () adnc com>
Date: Tue, 16 Mar 2004 07:32:57 -0800
Hi Drew - We have 6 backbones distributed across two 7507s and we messed around with a lot of different ways to make this happen. MEDs, Weights, manual BGP configurations every time one of the connections would get overloaded (even at 2am), you name it - we tried it, and in the end we determined that we needed something that could keep an eye on everything and do it automatically within guidelines I had set. In the end, we headed the route of performance-based routing optimization hardware. After testing many different vendors, we choose the RouteScience PathControl box to make my life (as well as the life of my lead backbone engineer) much, much simpler. About a month or two ago, there was quite a discussion on route-optimization hardware on the list including a lot of different ideas. If you do a search on the list for RouteScience or route optimization, you should hit the core of the discussion around the different platforms. If you need more info, feel free to contact me off-list. On Fri, 12 Mar 2004 22:39:16 -0500 Drew Weaver <drew.weaver () thenap com> wrote:
Does anyone know of an article, or documentation regarding load balancing the traffic on 3 or more FastEthernet interfaces on the outgoing direction? Right now we're running BGP internally, and the routes that are being chosen based upon the final BGP decision step or what I like to call the 'IP address tie breaker' which is not always optimal. We have a cisco 7500 that is connected to 4 other Cisco 7500s which each have 45Mbps ds3s to the Internet, we would like to load balance the outgoing traffic across all 4 of these 7500s, can anyone shine any advice my way? I noticed that there are instructions on Cisco's site regarding doing LB on 12000s. Anyways thanks in advance ;-) -Drew
****************************************** Richard J. Sears Vice President American Digital Network ---------------------------------------------------- rsears () adnc com http://www.adnc.com ---------------------------------------------------- 858.576.4272 - Phone 858.427.2401 - Fax ---------------------------------------------------- I fly because it releases my mind from the tyranny of petty things . . "Work like you don't need the money, love like you've never been hurt and dance like you do when nobody's watching."
Current thread:
- Load Balancing Multiple DS3s (outgoing) on a 7500 Drew Weaver (Mar 12)
- Re: Load Balancing Multiple DS3s (outgoing) on a 7500 Patrick W . Gilmore (Mar 12)
- Re: Load Balancing Multiple DS3s (outgoing) on a 7500 joe mcguckin (Mar 12)
- Re: Load Balancing Multiple DS3s (outgoing) on a 7500 Patrick W . Gilmore (Mar 12)
- Re: Load Balancing Multiple DS3s (outgoing) on a 7500 Stephen J. Wilcox (Mar 13)
- Re: Load Balancing Multiple DS3s (outgoing) on a 7500 Patrick W . Gilmore (Mar 14)
- Re: Load Balancing Multiple DS3s (outgoing) on a 7500 joe mcguckin (Mar 12)
- Re: Load Balancing Multiple DS3s (outgoing) on a 7500 Joe Abley (Mar 12)
- Re: Load Balancing Multiple DS3s (outgoing) on a 7500 Will Yardley (Mar 13)
- Re: Load Balancing Multiple DS3s (outgoing) on a 7500 Nick Feamster (Mar 25)
- Re: Load Balancing Multiple DS3s (outgoing) on a 7500 Patrick W . Gilmore (Mar 12)
- Re: Load Balancing Multiple DS3s (outgoing) on a 7500 Bruce Pinsky (Mar 15)
- <Possible follow-ups>
- RE: Load Balancing Multiple DS3s (outgoing) on a 7500 Michel Py (Mar 12)