RE: RADWare Linkproof? (or better ways to multihome)

["rick" <rsmith () firstnet co uk>]

have you considered getting 2 ranges (1 from each provider) and then getting
agreements from each where they cross advertise your allocated ranges out,

e.g.

ISP 1 advertises its own /19 + /23 allocated to you from ISP2
ISP 2 advertises its own /19 + /23 allocated to you from ISP1

Some ISP's will not do this but I do know some of the big boys in the UK
will do it and the US is where we first saw this idea in us.

Then load each server across an address out of each range

This then gives you full redundancy of running BGP without the expense or
without requiring the in house expertise

Thanks


Richard Smith
Firstnet
email: rsmith () firstnet co uk
****************************************************************************
******

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
The views expressed in the email and files transmitted with it are those of
the individual, not the company. If you have received this email in error
please notify rsmith () firstnet co uk

********************************************
**************************************


-----Original Message-----
From: owner-nanog () merit edu [mailto:owner-nanog () merit edu]On Behalf Of
Brantley Jones
Sent: 01 November 2000 16:50
To: Mike Johnson
Cc: nanog () merit edu
Subject: Re: RADWare Linkproof? (or better ways to multihome)



At 11:38 AM 11/1/2000 -0500, you wrote:

> Mohamed Hirse [madlion () justin net] wrote:
> > Mike,
> > If the purpose of using BGP is to server load balance, there are other
> > products that work as well if not better. Take a look at F5, Alteon and
> > Arrowpoint. BGP will be a good method to load share traffic between
> > multiple different providers
>
> I might not have made myself clear.  We will be buying ISP services
> ('net connections) from two different providers.
>
> We are looking at other products for server load balancing.  I've
> kinda narrowed it down to Alteon, RADWare, and Foundry.  But that's
> for server load balancing, not for load balancing between providers.
>
> Thanks,
> Mike
> --
> Mike Johnson
> Network Engineer / iSun Networks, Inc.
> Morrisville, NC
> All opinions are mine, not those of my employer

Mike,

I know exactly what you're talking about.  How much does the Linkproof
cost?  It could come down to a cost issue.  Looking at the Linkproof
documentation, it looks like you MAY still need a router.  It sounds like
the Linkproof is just a smart NAT box with some QOS features.  Are you
going to be advertising your IP block to both providers?  If one goes down,
will you still be routable globally?  If not, how could the Linkproof
possibly handle that?

Brantley