nanog mailing list archives

Re: Alternative sources for Cisco memory?


From: Nathan Stratton <nathan () robotics net>
Date: Thu, 24 Sep 1998 15:56:06 -0400 (EDT)

On Thu, 24 Sep 1998, Craig A. Huegen wrote:

On Thu, Sep 24, 1998 at 12:35:20PM -0400, Nathan Stratton wrote:

==>You sure can, most providers upgrade the memory on their ciscos with 3rd
==>party RAM, the cisco stuff just cost to much. I dont know of "Cisco
==>certified" memory dealers, but just buying decent RAM from any good vender
==>should be fine. 

"Decent RAM" does *not* cut it--you need *good* RAM from a good vendor.

Sorry let me change my above "decent RAM from any good vender" to "good
RAM from any decent vendor." I was not aware that was such a big
difference between decent and good RAM. Are decent vendors ok, or do
they need to be good vendors like the good RAM? ;-)
 
Be aware that this recommendation is not complete without the caveat
that Cisco will not support your processor card if you stick
unapproved third-party RAM in it.  It's very important to use QUALITY
memory in the box.

True. I also don't recommend you broadcasting to Cisco that you are doing
this.
 
With that said, Cisco does have an AVL (authorized vendor list) for
third-party memory.  Kingston carries this, and will even cross-ref
the Cisco part numbers for you.

/cah


<>
Nathan Stratton                         Telecom & ISP Consulting
www.robotics.net                        nathan () robotics net
--
"No king is saved by the size of his army; no warrior escapes by
his great strength."                               - Psalm 33:16



Current thread: