nanog mailing list archives
Re: Inter-CO signaling?
From: "John M. Brown" <jmbrown () ihighway net>
Date: Sun, 13 Sep 1998 02:24:26 -0700
US West is also doing this now. Welcome to TelCo HELL. jmbrown () ihighway net At 10:32 PM 9/10/98 +0000, you wrote:
From: James Carlson <carlson () ironbridgenetworks com> - If they're using channel banks between you and the customer's switch (like if they dropped you cheap T1s by putting them line-side on your switch, rather than trunk- side), then you lose. 24Kbps will be about the maximum.Yes, BellSouth did something like that to us at our main dial-in bank over last weekend. They've been running out of dialtone on the switch, since we have so many lines (much more than they ever expected in a rural area). Now, they claim that they only promise that we will receive 9.6Kbps per line! We've been told this by several persons. We are getting 28.8Kbps. This problem has taken a lot of my time all week.- Some misconfigurations will merely cause lots of errors and poor performance rather than abject failure. Check AMI versus B8ZS (look for coding violations), and check for clocking problems (extremely frequent slips noted by FDL).We had that problem on T1s, until we switched to PRIs. More expensive per line, but at least they work better. ILEC equipment is in a terrible state. WSimpson () UMich edu Key fingerprint = 17 40 5E 67 15 6F 31 26 DD 0D B9 9B 6A 15 2C 32
Current thread:
- Re: Inter-CO signaling?, (continued)
- Re: Inter-CO signaling? Jason Vanick (Sep 15)
- RE: Inter-CO signaling? Chad Skidmore (Sep 10)
- Re: Inter-CO signaling? Robert E. Seastrom (Sep 10)
- Re: Inter-CO signaling? Jared Mauch (Sep 10)
- Re: Inter-CO signaling? Dan Hollis (Sep 11)
- Re: Inter-CO signaling? James Carlson (Sep 10)
- Re: Inter-CO signaling? Robert E. Seastrom (Sep 10)
- Re: Inter-CO signaling? Robert E. Seastrom (Sep 10)
- RE: Inter-CO signaling? Dan Hollis (Sep 10)
- RE: Inter-CO signaling? Chad Skidmore (Sep 10)
- Re: Inter-CO signaling? William Allen Simpson (Sep 10)
- Re: Inter-CO signaling? John M. Brown (Sep 13)