Re: Errors from a 7513..

[Aaron Hughes <aaronh () ultra net>]

Can you paste a 'sh buff' in here as it looks like you are out of buffers.



-       Aaron Hughes
-       UltraNet Communications, Inc.
-       aaronh () ultra net.


On Tue, 9 Dec 1997, Adrian Chadd wrote:

> %SYS-2-GETBUF: Bad getbuffer, bytes= 40470
> -Process= "<interrupt level>", ipl= 1
> -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
> %SYS-5-CONFIG_I: Configured from console by vty1 (203.55.84.2)
> %SYS-2-GETBUF: Bad getbuffer, bytes= 38198
> -Process= "<interrupt level>", ipl= 1
> -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
> %SYS-2-GETBUF: Bad getbuffer, bytes= 62691
> -Process= "<interrupt level>", ipl= 1
> -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
> %SYS-2-GETBUF: Bad getbuffer, bytes= 38118
> -Process= "<interrupt level>", ipl= 1
> -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
> %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state
> to down
> %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state
> to up
> %SYS-2-GETBUF: Bad getbuffer, bytes= 60021
> -Process= "<interrupt level>", ipl= 1
> -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
> %SYS-2-GETBUF: Bad getbuffer, bytes= 56788
> -Process= "<interrupt level>", ipl= 1
> -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
>
> I have been getting pages of these lately.
>
> Its a 7513 w/ dual RSP2 modules and 64mb RAM. Its running IOS 11.2(8) P w/
>
> 1 SSIP controller (8 Serial).
> 1 VIP2 controller (1 FastEthernet)(4 Serial).
> 1 FastEthernet/IEEE 802.3 interface(s)
> 12 Serial network interface(s)
>
> Has anyone on the list come across this before?
>
> Adrian