Firewall Wizards mailing list archives
PIX501 PAT and Static NAT problems
From: "Aidan O'Rawe" <a.orawe () ntlworld com>
Date: Sun, 1 Jun 2003 22:36:12 +0100
Hi, I'm having a bit of trouble with a PIX501, I have issued the following commands to allow all the internal users to connect through the PIX to the outside: nat (inside) 1 0.0.0.0 0.0.0.0 0 0 global (outside) 1 interface Everything works fine untill I add a static for an internal web server, then all internal users can't get to the outside of the PIX anymore. I configured this with the following commands: static (inside,outside) <External IP> 192.168.1.2 0 8 conduit permit tcp host <External IP> eq 80 any Does anyone know the right way to go about configuring this properly? TIA Arj. _______________________________________________ firewall-wizards mailing list firewall-wizards () honor icsalabs com http://honor.icsalabs.com/mailman/listinfo/firewall-wizards
Current thread:
- PIX501 PAT and Static NAT problems Aidan O'Rawe (Jun 01)
- <Possible follow-ups>
- RE: PIX501 PAT and Static NAT problems Smith Bruce (Jun 02)
- Re: PIX501 PAT and Static NAT problems Dave Rinker (Jun 02)
- RE: PIX501 PAT and Static NAT problems Bob Wanamaker - Avant Systems, Inc. (Jun 02)
- RE: PIX501 PAT and Static NAT problems Dario Calia (Jun 03)
- RE: PIX501 PAT and Static NAT problems Bob Wanamaker - Avant Systems, Inc. (Jun 03)
- RE: PIX501 PAT and Static NAT problems Dario Calia (Jun 04)
- RE: PIX501 PAT and Static NAT problems Dario Calia (Jun 03)