Firewall Wizards mailing list archives
cisco pix and sonicwall pro vpn
From: "Daniel Handley" <daniel () homepage net>
Date: Fri, 23 Feb 2001 07:53:21 -0000
i have a cisco pix 515 5.3(1) and a sonicwall pro that i need to create a vpn between. the pix is already part of a vpn with four sites using ipsec and IKE isakmp method. the sonicwall has firmware version 3 that doesn't support IKE so i ned to set this manually. i have followed what i beleved to be the correct insturction from the manual, and found an article recomending trying the sp1 codes in decimal rather than hex, but to no avail. here is what i have done so far, rip it to pieces please. access-list 100 permit ip 172.16.1.0 255.255.255.0 172.16.0.0 255.255.255.0 access-list 200 permit ip 172.16.1.0 255.255.255.0 172.16.0.0 255.255.255.0 crypto ipsec transform-set spnc-spweb esp-des esp-md5-hmac crypto map map2 200 ipsec-manual crypto map map2 200 match address 200 crypto map map2 200 set peer x.x.x.x crypto map map2 200 set transform-set spnc-spweb crypto map map2 200 set session-key inbound ah 201 x crypto map map2 200 set session-key outbound ah 202 x crypto map map2 200 set session-key inbound esp 201 cipher x authenticator x crypto map map2 200 set session-key outbound esp 202 cipher x authenticator x crypto map map2 interface outside does anyone have any suggestions. Daniel Handley Infrastructure Manager, HomePage Ltd Tel: 020 8880 4570 Fax: 020 8880 4328 mailto:daniel () homepage net http://www.homepage.net _______________________________________________ firewall-wizards mailing list firewall-wizards () nfr com http://www.nfr.com/mailman/listinfo/firewall-wizards
Current thread:
- cisco pix and sonicwall pro vpn Daniel Handley (Feb 25)